Nortel Networks 4050 manual Adding a new syslog server, Add Syslog Server fields

Chapter 10 Configuring system settings 535

From this screen, complete the following tasks as necessary:

•“Adding a new syslog server” on page 535

•“Reordering a new syslog server” on page 536

•“Removing an existing syslog server” on page 536

Adding a new syslog server

To add a new syslog server entry, perform the following steps:

1Select the System > Servers > Syslog Servers tab. The Syslog Servers table appears (see Figure 148).

2Click Add.

The Add Syslog Server dialog box appears (see Figure 149).

Figure 149 Add Syslog Server

3Enter the syslog server information in the applicable fields. Table 108 describes the Add Syslog Server fields.

Table 108 Add Syslog Server fields

Field	Description
IP Address	Specifies the IP address of the syslog server.
Local Facility	Specifies a local facility number that can be used to
	uniquely identify syslog entries.

4Click Add.

The syslog server entry appears in the Syslog Server Table.

Nortel Secure Network Access Switch 4050 User Guide