Nortel Networks 4050 Specify the certificate to be used by the portal server, Main# cfg/quick

124Chapter 4 Configuring the domain

Depending on the options you select in connection with certificates and creating a test user, the two wizards also create similar default settings (see “Settings created by the quick setup wizard” on page 60).

You can later modify all settings created by the domain quick setup wizard (see “Configuring domain parameters using the CLI” on page 130).

1Launch the domain quick setup wizard.

>>Main# cfg/quick

2Specify the pVIP of the Nortel SNAS 4050 domain.

You can configure additional pVIPs later (see “Configuring domain parameters using the CLI” on page 130).

IP address of domain portal: <IPaddr>

3Specify a name for the Nortel SNAS 4050 domain, as a mnemonic aid.

Name of the domain: <name>

4Specify the port on which the portal web server listens for SSL communications. The default for HTTPS communications is port 443.

Listen port of domain portal [443]:

5Specify the certificate to be used by the portal server.

Use existing certificate (no/1) [no]:

If certificates exist on the system, the certificate numbers will be offered as valid input options. Choose one of the following:

aTo create a new certificate by pasting in the contents of a certificate file from a text editor, press Enter to accept the default value (no). Go to step 6 on page 125.

bTo create a test certificate, press Enter to accept the default value (no). Go to step 7 on page 125.

320818-A