Nortel Networks 4050 Managing Radius accounting servers using the CLI, Cfg/domain #/aaa/radacct

Chapter 4 Configuring the domain 147

When you add an external RADIUS accounting server to the configuration, the server is automatically assigned an index number. Nortel SNAS 4050 accounting will be performed by an available server with the lowest index number. You can control accounting server usage by reassigning index numbers (see “Managing RADIUS accounting servers using the CLI” on page 147).

To configure the Nortel SNAS 4050 to support RADIUS accounting, use the following command:

/cfg/domain #/aaa/radacct

The Radius Accounting menu displays.

The Radius Accounting menu includes the following options:

/cfg/domain #/aaa/radacct followed by:

servers	Accesses the Radius Accounting Servers menu, in
	order to configure external RADIUS accounting servers
	for the domain (see “Managing RADIUS accounting
	servers using the CLI” on page 147).
vpnattribu	Accesses the VPN Attribute menu, in order to
	configure Nortel SNAS 4050-specific attributes to be
	sent to the accounting server (see “Configuring Nortel
	SNAS 4050-specific attributes using the CLI” on
	page 149).
ena	Enables RADIUS accounting.
	The default is disabled.
dis	Disables RADIUS accounting.
	The default is disabled.

Managing RADIUS accounting servers using the CLI

To configure the Nortel SNAS 4050 to use external RADIUS accounting servers, use the following command:

/cfg/domain #/aaa/radacct/servers

The Radius Accounting Servers menu displays.

Nortel Secure Network Access Switch 4050 User Guide