AQUOS LINK
Selecting recorder
You can select a recorder for the recording from several connected recorders.
1Repeat steps 1 to 3 in AQUOS LINK Auto power on.
2Press a/b to select “Selecting Recorder”, and then press ENTER.
Auto Power On |
|
|
|
|
|
|
|
|
|
Selecting Recorder |
|
|
|
|
Using Genre Info. |
| Input | Location | |
|
|
|
|
|
|
| INPUT4 | [1. 0. 0. 0] |
|
|
|
|
|
|
|
| INPUT5 | [2. 0. 0. 0] |
|
|
|
|
|
|
3Select the recorder, and then press ENTER.
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI- connected device with one remote control.
Use the following procedure to start playback.
1Press PLAY I to start playback of a title.
•See page 54, section “Playback of titles using AQUOS LINK” if you want to start playback using the list of the titles of the AQUOS BD Player.
2Press FWD J to fast forward. Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the
Use the following procedure to start recording.
Check the following items before recording.
•Make sure the antenna cable is connected properly.
•Check if the recording media (HDD, DVD, etc.) has enough capacity for recording a programme.
•Select the equipment for recording in Selecting Recorder.
4Press MENU to exit.
NOTE
•If you have connected the AQUOS
Auto Power On
Selecting Recorder
Using Genre Info. | Input | Location |
|
|
|
| INPUT4 | [1. 0. 0. 0] |
|
|
|
|
|
|
| INPUT4 (Sub) | [1. 1. 0. 0] |
|
|
|
|
|
|
| INPUT5 | [2. 0. 0. 0] |
|
|
|
Using Genre Info.
This function allows you to automatically switch to the appropriate sound mode depending on the genre information included in the digital broadcast.
1Repeat steps 1 to 3 in AQUOS LINK Auto power on.
2Press a/b to select “Using Genre Info.”, and then press ENTER.
3Press c/d to select “On”, and then press
ENTER.
1After you selected recording media (HDD, DVD, etc.) in the menu, please make sure the recording menu in the ready condition.
2Press REC E to record a programme.
3Press REC STOP H to stop recording.
Listening with the AQUOS LINK- compatible audio system
You can opt to listen to the TV sound only from the AQUOS
1Open the remote control unit’s fl ip cover, press OPTION and the AQUOS LINK menu screen displays.
2Press a/b to select “By AQUOS AUDIO SP”, and then press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
•The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS
•You can use VOL k/l and MUTE (e).
53
