Sharp LC-65RX1X ATV Analogue/DTV/RADIO buttons, When you watch the TV for the first time

Watching TV

ATV (Analogue)/DTV/RADIO buttons

Use the following buttons on the remote control to operate the menu.

ATV: Press to switch to analogue mode. After switching from DTV, radio or external input mode to analogue mode, the TV jumps to the most recently viewed analogue channel.

DTV: Press to switch to DTV mode. After switching from analogue, radio or external input mode to DTV mode, the TV jumps to the most recently viewed DTV channel.

RADIO: Press to switch to radio mode. After switching from DTV to radio mode, the TV jumps to the most recently tuned radio channel.

When you watch the TV for the first time

When the TV powers on for the fi rst time after purchase, perform the auto installation.

ATV (Analogue TV)

You can run the auto installation to set channels automatically.

1To watch the analogue TV, select “Auto Installation” from Setup menu. (See page 20.)

2After setting the channels, you can select a channel using CH r/s or 0-9on the remote control unit. (See page 21.)

DTV (Digital TV)

When the TV accesses to DTV mode for the fi rst time, you need to run the auto search. To scan all available services in your area, follow the procedures below.

1To watch DTV broadcasts, select “Digital Search” from auto installation menu. (See page 11.)

2After setting the channels, you can select a channel using CH r/s or 0-9on the remote control unit. (See page 21.)

42