Chapter 6 Configuring authentication 245

Figure 56 shows sample output for the RADIUS method for the /cfg/domain 1/aaa/auth <auth ID> command and commands on the Authentication menu.

Figure 56 Authentication menu commands — RADIUS

>>Main# /cfg/domain 1/aaa/auth

Enter auth id: (1-63) 2 Creating Authentication 2

Select one of radius, ldap or local: radius

Auth name: radius

Entering: RADIUS settings menu

Entering: RADIUS servers menu

IP Address to add: <IPaddr> Port (default is 1812):

Enter shared secret: <secret>

Leaving: RADIUS servers menu

Enter vendor id for group [alteon]: Enter vendor type for group [1]: Enter vendor id for domain [alteon]: Enter vendor type for domain [3]: Leaving: RADIUS settings menu

---------------------------------------------------------

[Authentication 2 Menu]

type

- Set authentication mechanism

name

- Set auth

name

display

- Set auth

display name

radius

- RADIUS settings menu

adv

- Advanced

settings menu

del

- Remove Authentication

>> Authentication 2#

Modifying RADIUS configuration settings using the CLI

To modify settings for the authentication method itself, see “Configuring authentication methods using the CLI” on page 239.

To modify settings for the specific RADIUS configuration, use the following command:

/cfg/domain 1/aaa/auth #/radius

Nortel Secure Network Access Switch 4050 User Guide

Page 245
Image 245
Nortel Networks 4050 manual Modifying Radius configuration settings using the CLI, Main# /cfg/domain 1/aaa/auth