Nortel Networks 4050 Click Add Add a Group dialog box appears see Figure, Add a Group fields

Chapter 5 Configuring groups and profiles 211

2Click Add.

The Add a Group dialog box appears (see Figure 43).

Figure 43 Adding a Group screen

3Enter the Group information in the applicable fields. Table 31 describes the Add a Group fields.

Table 31 Add a Group fields

Field	Description
Group ID (Index)	An integer in the range 1 to 1023 that uniquely
	identifies the group in the Nortel SNAS 4050 domain.
Group Name	A string that uniquely identifies the group on the Nortel
	SNAS 4050. The group name must match a group
	name used by the authentication services.
Maximum Login Sessions	The maximum number of simultaneous portal or Nortel
	SNAS 4050 sessions allowed for each member of the
	group. The default is 0 (unlimited).
Tunnel Guard SRS Rule	Specifies the preconfigured TunnelGuard SRS rule to
	apply to the group.
	For information about configuring the SRS rules using
	the SREM, see “TunnelGuard SRS Builder” on
	page 317.

4Click Apply.

The new group appears in the list of groups.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide