Nortel Networks 4050 manual Configuring the Snmp v2 MIB using the CLI, SNMPv2-MIBmenu displays

	Chapter 12 Configuring SNMP 621
/cfg/sys/adm/snmp
followed by:
versions <v1v2cv3>	Specifies the SNMP versions allowed. Enter one or
	more of the following options:
	• v1 — SNMP version 1
	• v2c — SNMP version 2c
	• v3 — SNMP version 3
	To configure support for multiple versions, use a
	comma to separate the entries.
	The default is all versions (v1, v2c, v3).
snmpv2-mib	Accesses the SNMPv2-MIBmenu, in order to
	configure parameters in the standard SNMP v2 MIB for
	the system (see “Configuring the SNMP v2 MIB using
	the CLI” on page 621).
community	Accesses the SNMP Community menu, in order to
	configure the community aspects of SNMP monitoring
	(see “Configuring the SNMP community using the CLI”
	on page 622).
users	Accesses the SNMP User menu, in order to manage
	SNMPv3 users (see “Configuring SNMPv3 users using
	the CLI” on page 623).
target	Accesses the Notification Target menu, in order to
	configure the notification target aspects of SNMP
	monitoring (see “Configuring SNMP notification targets
	using the CLI” on page 626).
event	Accesses the Event menu, in order to create custom
	monitoring definitions for the objects in the
	DISMAN-EVENT-MIB (see “Configuring SNMP
	notification targets using the CLI” on page 626).

Configuring the SNMP v2 MIB using the CLI

To configure parameters in the standard SNMPv2 MIB, use the following command:

/cfg/sys/adm/snmp/snmpv2-mib

The SNMPv2-MIBmenu displays.

Nortel Secure Network Access Switch 4050 User Guide