Nortel Networks 4050 manual Roadmap of system commands

460Chapter 10 Configuring system settings

•disabling SSL traffic trace commands (see “Configuring system settings using the CLI” on page 463)

Roadmap of system commands

The following roadmap lists the CLI commands to configure cluster-wide parameters and the Nortel SNAS 4050 host within the cluster. Use this list as a quick reference or click on any entry for more information:

Command	Parameter
/cfg/sys	mip <IPaddr>
	distrace
/cfg/sys/host <host ID>	ip <IPaddr>
	sysName <name>
	sysLocatio <location>
	license <key>
	gateway <IPaddr>
	ports
	hwplatform
	halt
	reboot
	delete
/cfg/sys/host	ip <IPaddr>
<host ID>/interface
<interface ID>
	netmask <mask>
	gateway <IPaddr>
	vlanid <tag>
	mode failovertrunking
	primary <port>
	delete
/cfg/sys/routes	list
320818-A