Nortel Networks 4050 manual Adding a new Audit Server, Add Audit Server fields

560Chapter 10 Configuring system settings

Adding a new Audit Server

To add a new RADIUS audit server, perform the following steps:

1Select the System > Administrative > Radius Audit > Audit Servers tab. The Audit Server Table appears (see Figure 161 on page 559).

2Click Add.

The Add Audit Server dialog box appears (see Figure 162).

Figure 162 Add Audit Server

3Enter the RADIUS audit server information in the fields provided. Table 117 describes the Add Audit Server fields.

Table 117 Add Audit Server fields

Field	Description
IP Address	Specifies the IP address of the RADIUS audit server.
Port	Specifies the TCP port number used for RADIUS auditing.
	The default is 1813.
Secret Key	Specifies the password used to authenticate the Nortel
	SNAS 4050 to the audit server.

4Click Add.

The new audit server entry appears in the Audit Server Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A