Chapter 4 Configuring the domain 183

2Enter the redirection information in the applicable fields. Table 27 describes the HTTP Redirect fields.

Table 27 HTTP Redirect fields

Field

Description

 

 

Port Number

Specifies the TCP port number on which the portal server

 

listens for HTTP communications. The default value is 80.

 

Note: If you do not accept the default value and you specify

 

a different port, you must modify the Red and Yellow filters

 

on the network access devices accordingly. Otherwise, the

 

client PC will not be able to reach the portal for user

 

authentication.

 

 

Enable Http Redirect

Specifies whether HTTP requests will be redirected to the

 

HTTPS server.

 

 

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Configuring RADIUS accounting using the SREM

The Nortel SNAS 4050 can be configured to provide support for logging administrative operations and user session start and stop messages to a RADIUS accounting server.

With RADIUS accounting enabled, the Nortel SNAS 4050 sends an accounting request start packet to the accounting server for each user who successfully authenticates to the Nortel SNAS 4050 domain. The start packet contains the following information:

client user name

Nortel SNAS 4050 RIP

session ID

When the user session terminates, the Nortel SNAS 4050 sends an accounting request stop packet to the accounting server. The stop packet contains the following information:

session ID

session time

Nortel Secure Network Access Switch 4050 User Guide

Page 183
Image 183
Nortel Networks 4050 manual Configuring Radius accounting using the Srem, Http Redirect fields