Nortel Networks Managing Nortel Snas 4050 devices using the CLI, Boot followed by, Software

Chapter 14 Maintaining and managing the system 733

Managing Nortel SNAS 4050 devices using the CLI

To manage Nortel SNAS 4050 software and devices, use the following command:

/boot

The Boot menu displays.

The Boot menu includes the following options:

/boot followed by:

software	Accesses the Software Management menu, in order
	to view, download, and activate software versions (see
	“Managing software for a Nortel SNAS 4050 device
	using the CLI” on page 734).
halt	Stops the Nortel SNAS 4050 device to which you are
	connected (using Telnet, SSH, or a console
	connection). If you have a Telnet or SSH connection to
	the Management IP address (MIP), use the
	/cfg/sys/host #/
	halt command instead (see page 467).
	Note: Always use the halt command before turning
	off the device.

Nortel Secure Network Access Switch 4050 User Guide