Nortel Networks 4050 manual Start/Stop Trace fields

740Chapter 14 Maintaining and managing the system

2Enter the Trace information in the applicable fields. Table 168 describes the Start/Stop Trace fields.

Table 168 Start/Stop Trace fields

Field	Description
Trace type	Specifies the specific features or subsystems to which you
	want to limit tracing. Options are:
	• aaa — logs authentication method, user name, group,
	and extended profile
	• dns — logs failed DNS lookups made during the
	session
	• ssl — logs information related to the SSL handshake
	procedure (for example, the cipher used)
	• tg — logs information related to the TunnelGuard check
	(for example, TunnelGuard session status and the SRS
	rule check result)
	• snas — logs operations and events of Nortel
	SNA-controlled switches
	To trace all available types, choose the Select all available
	option.
	Note: If listed, the following options are not supported in
	Nortel Secure Network Access Switch
	Software Release 1.0: pptp, upref, smb, ftp.
Domain	Specifies the Nortel SNAS 4050 domain to which you want
	to limit tracing.
Protocol	Specifies the file export protocol. The options are TFTP,
	FTP, SFTP. The default is TFTP.
Hostname	Specifies the hostname or IP address of the host where a
	trace file is created.
Username	Specifies the user name to access a file exchange server.
	For FTP and SFTP.
Password	Specifies the password to access a file exchange server.
	For FTP and SFTP.
Remote Filename	Specifies the file name for the remote trace file.

3To start the trace, click Start Trace.

4To stop the trace, click Stop Trace.

320818-A