Nortel Networks manual Configuring Nortel Snas 4050 host SSH keys using, Add SSH Key fields

548Chapter 10 Configuring system settings

2Enter the SRS Control information in the applicable fields. Table 115 describes the SRS Control Settings fields.

Table 113 Add SSH Key fields

Field

SRS Port

Enabled

Description

Specifies the TCP port used for communication with the SRS administration server. The default is port 4443.

When checked, enables SRS administration, for creating and managing SRS rules.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Configuring Nortel SNAS 4050 host SSH keys using the

SREM

The Nortel SNAS 4050 functions as both SSH client (for importing and exporting logs using SFTP) and SSH server for secure management communications between the Nortel SNAS 4050 devices in a cluster.

Note: SCP is not supported.

The SSH host keys are a set of keys to be used by all hosts in the cluster in accordance with the Single System Image (SSI) concept. As a result, connections to the MIP always appear to an SSH client to be to the same host.

During initial setup, there is an option to generate the SSH host keys automatically.

To generate and manage the SSH keys used by Nortel SNAS 4050 hosts in the cluster, perform the following steps:

1Select the System > Administrative > SSH Keys tab. The SSH Keys screen appears.

2Select from one of the following tasks:

320818-A