Nortel Networks 4050 manual Audit, Auth, Telnet onoff, Ssh onoff, Srsadmin, Sshkeys

484Chapter 10 Configuring system settings

/cfg/sys/adm followed by:

audit	Accesses the Audit menu, in order to configure
	RADIUS auditing (see “Configuring RADIUS auditing
	using the CLI” on page 488).
auth	Accesses the Authentication menu, in order to
	configure RADIUS authentication of system users (see
	“Configuring authentication of system users using the
	CLI” on page 492).
telnet onoff	Enables or disables Telnet access for remote
	management of the system. The options are:
	• on — Telnet access is enabled. If there are no
	entries in the Access List, all Telnet connections are
	allowed. If there are any entries in the Access List,
	only the specified machines are allowed Telnet
	access.
	• off — All Telnet connections are rejected,
	including connections from machines in the Access
	List.
	The default is off.
	For more information about the Access List, see
	“Configuring the Access List using the CLI” on
	page 474.
ssh onoff	Enables or disables SSH access for remote
	management of the system. The options are:
	• on — SSH access is enabled. If there are no
	entries in the Access List, all SSH connections are
	allowed. If there are any entries in the Access List,
	only the specified machines are allowed SSH
	access.
	• off — all SSH connections are rejected, including
	connections from machines in the Access List.
	The default is off.
	For more information about the Access List, see
	“Configuring the Access List using the CLI” on
	page 474.
srsadmin	Accesses the SRS Admin menu, in order to configure
	the TunnelGuard SRS rules (see “Enabling
	TunnelGuard SRS administration using the CLI” on
	page 485).
sshkeys	Accesses the SSH Host Keys menu, in order to
	manage SSH keys used by all Nortel SNAS 4050 hosts
	in the cluster in accordance with the Single System
	Image (SSI) concept (see “Configuring Nortel
	SNAS 4050 host SSH keys using the CLI” on
	page 485).

320818-A