Nortel Networks 4050 manual Viewing configuration details of monitor events, Add a Monitor fields

Chapter 12 Configuring SNMP 649

2Click Add.

The Add a Monitor dialog box appears. Depending on the type of monitor selected, the fields displayed on the Add a Monitor dialog will differ slightly (see Figure 189 on page 651, Figure 191 on page 654, and Figure 190 on page 652).

3Enter the Monitor information in the applicable fields. Table 137 describes the Add a Monitor fields.

Table 137 Add a Monitor fields

Field	Description
Monitor type	Specifies the type of monitor to add. The options are:
	•	Boolean
	•	Threshold
	•	Existence

4Click Apply.

The monitor event appears in the table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Viewing configuration details of monitor events

To view the configuration settings of an existing monitor event, perform the following steps:

1Select the System > Administrative > SNMP > Event > Monitor Table tab. The Monitor Table appears (see Figure 188 on page 648).

2Select the monitor to view from the Monitor Table.

The Configuration sub-tab appears, displaying settings for the selected monitor underneath the Monitor Table.

Monitor settings cannot be edited after the monitor is created. To change settings for an existing monitor, that monitor must first be removed and then recreated with the correct settings.

Nortel Secure Network Access Switch 4050 User Guide