Nortel Networks 4050 manual Switch menu includes the following options, Ip IPaddr

Chapter 3 Managing the network access devices 81

The Switch menu includes the following options:

/cfg/domain #/switch <switch ID> followed by:

name <name>	Names or renames the switch. After you have defined a
	name for the switch, you can use either the switch
	name or the switch ID to access the Switch menu.
	• name is a string that must be unique in the domain.
	The maximum length of the string is 255
	characters.
type ERS8300ERS5500	Specifies the type of network access device. Valid
	options are:
	• ERS8300 — an Ethernet Routing Switch 8300
	• ERS5500 — an Ethernet Routing Switch 5510,
	5520, or 5530
	The default is ERS8300.
ip <IPaddr>	Specifies the IP address of the switch.
port <port>	Specifies the TCP port used for Nortel SNA
	communication. The default is port 5000.
hlthchk	Accesses the Healthcheck menu, in order to configure
	settings for the Nortel SNAS 4050 to monitor the health
	of the switch (see “Monitoring switch health using the
	CLI” on page 89).
vlan	Accesses the Switch Vlan menu, in order to map the
	Green and Yellow VLANs configured on switch (see
	“Mapping the VLANs using the CLI” on page 82).
rvid <VLAN ID>	Identifies the Red VLAN for the network access device.
	• VLAN ID is the ID of the Red VLAN, as configured
	on the switch
sshkey	Accesses the SSH Key menu, in order to manage the
	exchange of public keys between the switch and the
	Nortel SNAS 4050 (see “Managing SSH keys for Nortel
	SNA communication using the CLI” on page 88)
reset	Resets all the Nortel SNA-enabled ports on the switch.
	Clients connected to the ports are moved into the Red
	VLAN.
ena	Enables the network access device. As soon as you
	enable the switch, the Nortel SNAS 4050 begins
	communicating with the switch and controlling its Nortel
	SNA clients.

Nortel Secure Network Access Switch 4050 User Guide