Nortel Networks 2300 Series Show load-balancing group, Output for show ap unconfigured, Radio 1

	AP Commands 385
	Table 21: Output for show ap unconfigured
Field	Description
Serial Id	Serial ID of the AP.
Model	AP model number.
IP Address	IP address of the AP. This is the address that the AP receives
	from a DHCP server. The AP uses this address to send a Find
	WSS message to request configuration information from WSS
	switches. However, the AP cannot use the address to establish a
	connection unless the AP first receives a configuration from a
	WSS.
Port	Port number on which this WSS received the AP’s Find WSS
	message.
VLAN	VLAN on which this WSS received the AP’s Find WSS
	message.

See Also

•show ap connection on page 371

•show ap global on page 373

show load-balancing group

Displays an RF load balancing group’s member radios and current load for each radio.

Syntax show load-balancing group {group-nameall [ap ap-numberradio {1 2}]}

group-name		Name of an RF load-balancing group configured on the WSS switch.
all		Displays information for every load-balancing group that has a radio on
		this WSS switch as a member.
ap-number		Index value that identifies the AP on the WSS switch.
radio {1 2}		Shows status information for a radio on an AP. This option displays infor-
		mation about radios in the same group as the specified radio.
Defaults	None.
Access	Enabled.

History Introduced in WSS Version 6.0.

Usage Use this command to display information about the RF load-balancing groups configured on the WSS and the individual AP radios in the load-balancing groups.

Nortel WLAN—Security Switch 2300 Series Command Line Reference