Nortel Networks 2300 Series manual Set service-profile long-retry-count

AP Commands 329

Usage Use this command to exempt a service profile from RF load balancing. Exempting a service profile from RF load balancing means that even if an AP radio is attempting to steer clients away, it does not reduce or conceal the availability of the SSID named in the exempted service profile. Even if a radio is withholding probe responses to manage its load, the radio does respond to probes for an exempt SSID. Also, if an AP radio is withholding probe responses, and a client probes for any SSID, and the radio has at least one exempt SSID, the radio responds to the probe, but the response reveals only the exempt SSID(s).

Examples The following command exempts service profile sp3 from RF load balancing:

WSS# set service-profile sp3 load-balancing-exempt enable

success: change accepted.

See Also

•set load-balancing strictness on page 277

•set ap radio load-balancing on page 268

•set ap local-switching mode on page 260

•set ap radio load-balancing group on page 269

set service-profile long-retry-count

Changes the long retry threshold for a service profile. The long retry threshold specifies the number of times a radio can send a long unicast frame without receiving an acknowledgment. A long unicast frame is a frame that is equal to or longer than the frag-threshold.

Syntax set service-profile name long-retry-count threshold

name	Service profile name.
threshold	Number of times the radio can send the same long unicast frame. You can
	enter a value from 1 through 15.

Defaults The default long unicast retry threshold is 5 attempts. Access Enabled.

History Introduced in WSS Software Version 4.1.

Examples The following command changes the long retry threshold for service profile sp1 to 8:

WSS# set service-profile sp1 long-retry-count 8

success: change accepted.

See Also

•set radio-profilefrag-threshold on page 289

•set service-profileshort-retry-count on page 325

•show service-profile on page 380

Nortel WLAN—Security Switch 2300 Series Command Line Reference