Nortel Networks 2300 Series manual 802.11b/g-6, 802.11a-Lowest valid, Option dap removed for AP

250AP Commands

Table 1: Radio-Specific Parameters (continued)

Parameter	Default Value		Description
channel	•	802.11b/g—6	Number of the channel in which a radio
	•	802.11a—Lowest valid	transmits and receives traffic
		channel number for the
		country of operation
mode	disable		Operational state of the radio.
radio-profile	None. You must add the radios to a		802.11 settings
	radio profile.

tx-power	Highest setting allowed for the
	country of operation or highest
	setting supported on the hardware,
	whichever is lower.

Transmit power of a radio, in decibels referred to 1 milliwatt (dBm)

Access Enabled

History

Version 5.0

•Option antenna-location added.

•Option auto-tune min-client-rate removed.

•Option auto-tune max-retransmissions removed.

Version 6.0 • Option dap removed for AP.

Usage When you clear a radio, WSS Software performs the following actions:

•Clears the transmit power, channel, and external antenna setting from the radio.

•Removes the radio from its radio profile and places the radio in the default radio profile.

This command does not affect the PoE setting.

Examples The following command disables and resets radio 2 on the AP connected to port 3:

WSS# clear ap 3 radio 2

See Also

•set ap radio mode on page 270

•set ap radio radio-profile on page 271

•set port type ap on page 41

NN47250-100 (Version 02.51)