Nortel Networks 2300 Series manual Set ap radio radio-profile, WSS# set ap 1-5 radio 1 mode enable

	AP Commands 281
Access Enabled.
History
Version 4.0	Option auto added for configuration of the AP configuration
	profile.
Version 6.0	Option dap removed.

Usage To enable or disable one or more radios to which a profile is assigned, use the set ap radio radio- profile command. To enable or disable all radios that use a specific radio profile, use the set radio-profilecommand.

Examples The following command enables radio 1 on the AP connected to ports 1 through 5:

WSS# set ap 1-5 radio 1 mode enable

success: change accepted.

The following command enables radio 2 on ports 1 through 3:

WSS# set ap 1-3 radio 2 mode enable

success: change accepted.

See Also

•clear ap image

•set ap radio radio-profile on page 271

•set radio-profile mode on page 291

•show ap config on page 344

set ap radio radio-profile

Assigns a radio profile to an AP radio and enables or disables the radio.

Syntax set {ap port-listauto}} radio {1 2} radio-profile name mode {enable disable}

ap port-list	List of ports.
ap ap-num	Number of a AP.
ap auto	Sets the radio profile for the AP configuration profile. (See set ap auto on
	page 245.)
radio 1	Radio 1 of the AP.
radio 2	Radio 2 of the AP. (This option does not apply to single-radio models.)
radio-profile name	Radio profile name of up to 16 alphanumeric characters, with no spaces.
mode enable	Enables radios on the specified ports with the parameter settings in the
	specified radio profile.
mode disable	Disables radios on the specified ports.
Defaults None.

Nortel WLAN—Security Switch 2300 Series Command Line Reference