Nortel Networks 2300 Series manual Show network-domain Output, Syntax show network-domain

240Network Domain Commands

Syntax show network-domain

Defaults None.

Access Enabled.

History Introduced in WSS Software 4.1.

Examples To display Network Domain status, type the following command. The output of the command differs based on whether the WSS is a member of a Network Domain or a Network Domain seed.

On a WSS that is a Network Domain member, the following output is displayed:

WSS# show network-domain

Member Network Domain name: California

Member	State	Mode	Mobility-Domain
---------------	-------------	------	---------------
10.8.107.1	UP	SEED	default

On a WSS that is a Network Domain seed, information is displayed about the Network Domains of which the WSS is a member, as well as Network Domain seeds with which the WSS has a peer relationship. For example:

WSS# show network-domain
Network Domain name: California
Peer	State
---------------	-------------
10.8.107.1	UP
Member	State	Mode	Mobility-Domain
---------------	-------------	------	---------------
10.1.0.0	DOWN	SEED
Member Network Domain name:
Member	State	Mode	Mobility-Domain
---------------	-------------	------	---------------
10.8.107.1	UP	MEMBER default
10.1.0.0	DOWN	SEED

Table 33 describes the fields in the display.

Table 1: show network-domain Output

FieldDescription

Output if WSS is the Network Domain seed:

Network Domain name	Name of the Network Domain for which the WSS is a seed.
Peer	IP addresses of the other seeds in the Network Domain.
State	State of the connection between the WSS and the peer Network
	Domain seeds:
	•	UP
	•	DOWN
Member	IP addresses of the seed WSS and members in the Network
	Domain

NN47250-100 (Version 02.51)