Nortel Networks 2300 Series manual Show ap global, Output for show ap global, WSS# show ap global

AP Commands 383

show ap global

Displays connection information for APs configured on a WSS.

Syntax show ap global [ap-numserial-id serial-ID]

ap-num		Number of a AP for which to display configuration settings.
serial-id serial-ID		AP serial ID.
Defaults	None.
Access	Enabled.

Usage Connections are shown only for the APs that are configured on the WSS from which you enter the command, and only for the Mobility Domain the switch is in.

To show information only for APs that have active connections, use the show ap connection command.

Examples The following command displays connection information for all the APs configured on a WSS:

WSS# show ap global

Total number of entries: 8

AP Serial Id WSS IP Address Bias

-------------- ---------------------- ----

1	11223344	10.3.8.111	HIGH
-	11223344	10.4.3.2	LOW
2	332211	10.3.8.111	LOW
-	332211	10.4.3.2	HIGH
17	0322100185 10.3.8.111		HIGH
-	0322100185 10.4.3.2		LOW
18	0321500120 10.3.8.111		LOW
-	0321500120 10.4.3.2		HIGH

Table 53 describes the fields in this display.

	Table 20: Output for show ap global
Field	Description
AP	Connection ID you assigned to the AP.
	Note: AP numbers are listed only for APs configured on this
	WSS. If the field contains a hyphen ( - ), the AP configuration
	displayed in the row of output is on another WSS.
Serial Id	Serial ID of the AP.

Nortel WLAN—Security Switch 2300 Series Command Line Reference