Nortel Networks 2300 Series manual Set snmp notify target, SNMPv3 with Informs, Snmp-engine-id

IP Services Commands 141

set snmp notify target

Configures a notification target for notifications from SNMP.

A notification target is a remote device to which WSS Software sends SNMP notifications. You can configure the WSS Software SNMP engine to send confirmed notifications (informs) or unconfirmed notifications (traps). Some of the command options differ depending on the SNMP version and the type of notification you specify. You can configure up to 10 notification targets.

SNMPv3 with Informs

To configure a notification target for informs from SNMPv3, use the following command:

Syntax set snmp notify target target-num ip-addr[:udp-port-number]usm inform user username

snmp-engine-id {ip hex hex-string} [profile profile-name]

[security {unsecured authenticated encrypted}] [retries num]

[timeout num]

target-num	ID for the target. This ID is local to the WSS and does
	not need to correspond to a value on the target itself.
	You can specify a number from 1 to 10.
ip-addr[:udp-port-number]	IP address of the server. You also can specify the UDP
	port number to send notifications to.
username	USM username. This option is applicable only when
	the SNMP version is usm.
	If the user will send informs rather than traps, you also
	must specify the snmp-engine-idof the target.
snmp-engine-id	SNMP engine ID of the target. Specify ip if the
{ip hex hex-string}	target’s SNMP engine ID is based on its IP address. If
	the target’s SNMP engine ID is a hexadecimal value,
	use hex hex-stringto specify the value.
profile profile-name	Notification profile this SNMP user will use to specify
	the notification types to send or drop.

security {unsecured authenticated encrypted}

Specifies the security level, and is applicable only when the SNMP version is usm:

•unsecured—Message exchanges are not authenticated, nor are they encrypted. This is the default.

•authenticated—Message exchanges are authenticated, but are not encrypted.

•encrypted—Message exchanges are authenticated and encrypted.

Nortel WLAN—Security Switch 2300 Series Command Line Reference