Nortel Networks 2300 Series manual 802.11a, 802.11b, 802.11g

AP Commands 357

Table 7: Output for show ap config (continued)

Field	Description
type	Radio type:
	•	802.11a
	•	802.11b
	•	802.11g
mode	Radio state:
	•	Enabled
	•	Disabled
channel	Channel number.
antennatype	External antenna model, if applicable.
tx pwr	Transmit power, in dBm.
profile	Radio profile that manages the radio. Until you assign the radio
	to a radio profile, WSS Software assigns the radio to the default
	radio profile.
auto-tune max-power	Maximum power level the RF Auto-Tuning feature can set on the
	radio.

• The value default means RF Auto-Tuning can set the power up to the maximum level allowed for the country of operation.

• A specific numeric value means you or another administrator set the maximum value.

See Also

•set ap on page 33

•set port type ap on page 41

•set ap bias on page 249

•set ap fingerprint on page 257

•set ap group on page 258

•set ap name on page 261

•set ap upgrade-firmware on page 275

•set ap radio mode on page 270

•set ap radio antennatype on page 263

•set ap radio channel on page 267

•set ap radio radio-profile on page 271

•set ap radio tx-power on page 272

•show ap connection on page 371

•show ap global on page 373

Nortel WLAN—Security Switch 2300 Series Command Line Reference