Nortel Networks 2300 Series Security ACL Commands, Clear security acl, Clears all security ACLs

459

Security ACL Commands

Use security ACL commands to configure and monitor security access control lists (ACLs). Security ACLs filter packets to restrict or permit network usage by certain users or traffic types, and can assign to packets a class of service (CoS) to define the priority of treatment for packet filtering.

(Security ACLs are different from the location policy on a WSS, which helps you locally control user access. For location policy commands, see Chapter , “AAA Commands,” on page 165.)

This chapter presents security ACL commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Create Security ACLs	set security acl on page 454
	show security acl editbuffer on page 462
	show security acl info on page 463
	show security acl on page 461
	clear security acl on page 449
Commit Security ACLs	commit security acl on page 452
	rollback security acl on page 453
Map Security ACLs	set security acl map on page 459
	show security acl map on page 464
	clear security acl map on page 451
Monitor Security ACLs	show security acl hits on page 462
	set security acl hit-sample-rate on page 460
	show security acl resource-usage on page 465

clear security acl

Clears a specified security ACL, an access control entry (ACE), or all security ACLs, from the edit buffer. When used with the command commit security acl, clears the ACE from the running configuration.

Syntax clear security acl {acl-name all} [editbuffer-index]

acl-name	Name of an existing security ACL to clear. ACL names start with a
	letter and are case-insensitive.
all	Clears all security ACLs.
editbuffer-index	Number that indicates which access control entry (ACE) in the
	security ACL to clear. If you do not specify an ACE, all ACEs are
	cleared from the ACL.

Nortel WLAN—Security Switch 2300 Series Command Line Reference