Nortel Networks 2300 Series manual Show rfdetect clients Output, WSS# show rfdetect clients

530RF Detection Commands

•set rfdetect black-list on page 515

show rfdetect clients

Displays the wireless clients detected by a WSS.

Syntax show rfdetect clients [mac mac-addr]

mac mac-addr		Displays detailed information for a specific client.
Defaults None.
Access	Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command shows information about all wireless clients detected by a WSS’s APs:
WSS# show rfdetect clients
Total number of entries: 30		AP MAC	AP	Port/Radio	NoL Type Last
Client MAC	Client
Vendor			Vendor	/Channel		seen
----------------- ------------------------		------- ------------- ------------------				------- -----
00:03:7f:bf:16:70	Unknown	Unknown		ap 1/1/6	1	intfr	207
00:04:23:77:e6:e5	Intel	Unknown		ap 1/1/2	1	intfr	155
00:05:5d:79:ce:0f	D-Link	Unknown		ap 1/1/149	1	intfr	87
00:05:5d:7e:96:a7	D-Link	Unknown		ap 1/1/149	1	intfr	117
00:05:5d:7e:96:ce	D-Link	Unknown		ap 1/1/157	1	intfr	162
00:05:5d:84:d1:c5	D-Link	Unknown		ap 1/1/1	1	intfr	52

The following command displays more details about a specific client:

WSS# show rfdetect clients mac 00:0c:41:63:fd:6d

Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys

Port: ap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84

Bssid: 00:0b:0e:01:02:00, Vendor: Nortel, Type: intfr, Dst: ff:ff:ff:ff:ff:ff

Last Rogue Status Check (secs ago): 3

The first line lists information for the client. The other lines list information about the most recent 802.11 packet detected from the client.

Table 77 and Table 78 describe the fields in these displays.

	Table 1: show rfdetect clients Output
Field	Description
Client MAC	MAC address of the client.
Client Vendor	Company that manufactures or sells the client.
AP MAC	MAC address of the radio with which the rogue client is
	associated.

NN47250-100 (Version 02.51)