Nortel Networks 2300 Series manual 12.0,24.0, Auto, 2.0,5.5,11.0

AP Commands 311

Table 5: Defaults for Service Profile Parameters (continued)

			Radio Behavior When
Parameter	Default Value		Parameter Set To
			Default Value
tkip-mc-time	60000		Uses Michael countermeasures
			for 60,000 ms (60 seconds)
			following detection of a second
			MIC failure within 60 seconds.
transmit-rates	802.11a:		Accepts associations only from
	•	mandatory:	clients that support one of the
			mandatory rates.
		6.0,12.0,24.0
			Sends beacons at the specified
	•	beacon-rate: 6.0
			rate (6 Mbps for 802.11a, 2 Mbps
	•	multicast-rate:	for 802.11b/g).
			Sends multicast data at the highest
		auto
	•		rate that can reach all clients
		disabled: none	connected to the radio.
	802.11b:		Accepts frames from clients at all
			valid data rates. (No rates are
	•	mandatory:
			disabled by default.)
		1.0,2.0
	•	beacon-rate: 2.0
	•	multicast-rate:
		auto
	•	disabled: none
	802.11g:
	•	mandatory:
		1.0,2.0,5.5,11.0
	•	beacon-rate: 2.0
	•	multicast-rate:
		auto
	•	disabled: none
user-idle-timeout	180		Allows a client to remain idle for
			180 seconds (3 minutes) before
			WSS Software changes the
			client’s session to the
			Disassociated state.

Nortel WLAN—Security Switch 2300 Series Command Line Reference