Nortel Networks 2300 Series Set authentication console, WSS# set authentication admin Jose sg3

AAA Commands 193

Defaults By default, authentication is deactivated for all admin users. The default authentication method in an admin authentication rule is local. WSS Software checks the local WSS database for authentication.

Access Enabled..

Note. The syntax descriptions for the set authentication commands have been separated for clarity. However, the options and behavior for the set authentication admin command are the same as in previous releases.

Usage You can configure different authentication methods for different groups of users. (For details, see “User Wildcards, MAC Address Wildcards, and VLAN Wildcards” on page 12.)

If you specify multiple authentication methods in the set authentication console command, WSS Software applies them in the order in which they appear in the command, with these results:

•If the first method responds with pass or fail, the evaluation is final.

•If the first method does not respond, WSS Software tries the second method, and so on.

•However, if local appears first, followed by a RADIUS server group, WSS Software ignores any failed searches in the local WSS database and sends an authentication request to the RADIUS server group.

Note. If a AAA rule specifies local as a secondary AAA method, to be used if the RADIUS servers are unavailable, and WSS Software authenticates a client with the local method, WSS Software starts again at the beginning of the method list when attempting to authorize the client. This can cause unexpected delays during client processing and can cause the client to time out before completing logon.

Examples The following command configures administrator Jose, who connects via Telnet, for authentication on RADIUS server group sg3:

WSS# set authentication admin Jose sg3

success: change accepted.

See Also

•clear authentication admin on page 167

•set authentication console on page 183

•set authentication dot1x on page 185

•set authentication mac on page 189

•set authentication web on page 191

•show aaa on page 210

set authentication console

Configures authentication and defines where it is performed for specified users with administrative access through a console connection.

Nortel WLAN—Security Switch 2300 Series Command Line Reference