Nortel Networks 2300 Series manual WSS# show radio-profile default

AP Commands 387

Defaults None.

Access Enabled.

History

Version 4.0

Version 4.1

Version 5.0

•New fields added:

•Countermeasures

•Active-Scan

•WMM enabled

•Name of the backoff timer field changed from Client Backoff Timer to Power Backoff Timer

•WMM enabled field renamed to QoS Mode.

•Long Retry Limit and Short Retry Limit fields moved to show service-profileoutput. (These options are now configurable on a service-profile basis instead of a radio-profile basis.)

•Allow 802.11g clients only field removed. (This option is now configured using the set service- profile transmit-ratescommand.)

•New fields added:

•Power ramp interval

•RFID enabled

•WMM Powersave

•Power Backoff Timer field removed.

Usage WSS Software contains a default radio profile. Nortel recommends that you do not change this profile but instead keep the profile for reference.

Examples The following command shows radio profile information for the default radio profile:

WSS# show radio-profile default

Beacon Interval:	100	DTIM Interval:	1
Max Tx Lifetime:	2000	Max Rx Lifetime:	2000
RTS Threshold:	2346	Frag Threshold:	2346
Long Preamble:	no	Tune Channel:	yes
Tune Power:	no	Tune Channel Interval:	3600
Tune Power Interval:	600	Power ramp interval:	60
Channel Holddown:	300	Countermeasures:	none
Active-Scan:	yes	RFID enabled:	no
WMM Powersave:	no	QoS Mode:	wmm

No service profiles configured.

Table 56 describes the fields in this display.

Nortel WLAN—Security Switch 2300 Series Command Line Reference