Nortel Networks 2300 Series manual Defaults

System Log Commands 587

severity severity-levelLogs events at a severity level greater than or equal to the level specified. Specify one of the following:

•emergency—The WSS is unusable.

•alert—Action must be taken immediately.

•critical—You must resolve the critical conditions. If the conditions are not resolved, the WSS can reboot or shut down.

•error—The WSS is missing data or is unable to form a connection.

•warning—A possible problem exists.

•notice—Events that potentially can cause system problems have occurred. These are logged for diagnostic purposes. No action is required.

•info—Informational messages only. No problem exists.

•debug—Output from debugging.

local-facilityfacility- For messages sent to a syslog server, maps all messages of the severity

levelyou specify to one of the standard local log facilities defined in RFC 3164. You can specify one of the following values:

•0—maps all messages to local0.

•1—maps all messages to local1.

•2—maps all messages to local2.

•3—maps all messages to local3.

•4—maps all messages to local4.

•5—maps all messages to local5.

•6—maps all messages to local6.

•7—maps all messages to local7.

If you do not specify a local facility, WSS Software sends the messages with their default WSS Software facilities. For example, AAA messages are sent with facility 4 and boot messages are sent with facility 20 by default.

enable	Enables messages to the specified target.
disable	Disables messages to the specified target.

Defaults

•Events at the error level and higher are logged to the WSS console.

•Events at the error level and higher are logged to the WSS system buffer.

•Trace logging is enabled, and debug-level output is stored in the WSS trace buffer. Access Enabled.

History Option port added in Version 4.1

Nortel WLAN—Security Switch 2300 Series Command Line Reference