Nortel Networks 2300 Series Set ap group, WSS# set ap 69 force-image-download enable, Auto on

268AP Commands

ap auto	Configures forced image download for the AP configuration profile. (See
	set ap auto on page 245.)
force-image-	Enables forced image download.
download enable
force-image-	Disables forced image download.
download disable

Defaults Forced image download is disabled by default. Access Enabled.

History Introduced in WSS Software 5.0. Optional dap removed 6.0.

Usage A change to the forced image download option takes place the next time the AP is restarted.

Even when forced image download is disabled (the default), the AP still checks with the WSS to verify that the AP has the latest image, and to verify that the WSS is running WSS Software Version 5.0 or later.

The AP loads its local image only if the WSS is running WSS Software Version 5.0 or later and does not have a newer AP image than the one in the AP’s local storage. If the switch is not running WSS Software Version

5.0or later, or the WSS has a newer version of the AP image than the version in the AP’s local storage, the AP loads its image from the WSS.

Examples The following command enables forced image download on AP 69:

WSS# set ap 69 force-image-download enable

success: change accepted.

See Also show ap config on page 344

set ap group

Configures a named group of APs. WSS Software automatically load balances sessions among the access points in a group. To balance the sessions, WSS Software rejects an association request for an access point’s radio if that radio has at least four more active sessions than the radio of the same type with the least number of active sessions within the group.

Syntax set {ap port-list ap {ap-num auto}} group name

ap port-list	List of AP access ports to add to the group.
ap ap-num	Number of a AP to add to the group.
ap auto	Configures an AP group for the AP configuration profile. (See set ap
	auto on page 245.)
name	AP group name of up to 16 alphanumeric characters, with no spaces.

Defaults APs are not grouped by default.

Access Enabled.

NN47250-100 (Version 02.51)