Nortel Networks 2300 Series manual Network Domain Commands, Clear network-domain

235

Network Domain Commands

Use Network Domain commands to configure and manage Network Domain groups.

A Network Domain is a group of geographically dispersed Mobility Domains that share information among themselves over a WAN link. This shared information allows a user configured on a WSS in one Mobility Domain to establish connectivity on a WSS in another Mobility Domain elsewhere in the same Network Domain. The WSS forwards the user traffic by creating a VLAN tunnel to a WSS in the remote Mobility Domain.

In a Network Domain, one or more WSSs serve as a seed switch. At least one of the Network Domain seeds maintains a connection with each of the member WSSs in the Network Domain. The Network Domain seeds share information about the VLANs configured on their members, so that all the Network Domain seeds have a common database of VLAN information.

This chapter presents Network Domain commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Network Domain	set network-domain mode seed domain-name on page 229
	set network-domain mode member seed-ip on page 227
	set network-domain peer on page 228
	show network-domain on page 229
	clear network-domain on page 225
	clear network-domain mode on page 226
	clear network-domain peer on page 226
	clear network-domainseed-ip on page 227

clear network-domain

Clears all Network Domain configuration and information from a WSS, regardless of whether the WSS is a seed or a member of a Network Domain.

Syntax clear network-domain

Defaults None.

Access Enabled.

History Introduced in WSS Software 4.1.

Usage This command has no effect if the WSS is not configured as part of a Network Domain. Examples To clear a Network Domain from a WSS within the domain, type the following command:

23x0# clear network-domain

This will clear all network-domain configuration. Would you like to continue? (y/n) [n] y success: change accepted.

Nortel WLAN—Security Switch 2300 Series Command Line Reference