Nortel Networks 2300 Series manual Set radio-profile long-retry, Set radio-profile max-rx-lifetime

300AP Commands

set radio-profile long-retry

Deprecated in WSS Software Version 4.1. In 4.1, this parameter is associated with service profiles instead of

radio profiles. See set service-profilelong-retry-count on page 319.

set radio-profile max-rx-lifetime

Changes the maximum receive threshold for the AP radios in a radio profile. The maximum receive threshold specifies the number of milliseconds that a frame received by a radio can remain in buffer memory.

Syntax set radio-profile name max-rx-lifetime time

name	Radio profile name.
time	Number of milliseconds. You can enter a value from 500 (0.5 second)
	through 250,000 (250 seconds).

Defaults The default maximum receive threshold for AP radios is 2000 ms (2 seconds). Access Enabled.

Usage You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples The following command changes the maximum receive threshold for radio profile rp1 to 4000 ms:

WSS# set radio-profile rp1 max-rx-lifetime 4000

success: change accepted.

See Also

•set radio-profile mode on page 291

•set radio-profilemax-tx-lifetime on page 290

•show radio-profile on page 376

set radio-profile max-tx-lifetime

Changes the maximum transmit threshold for the AP radios in a radio profile. The maximum transmit threshold specifies the number of milliseconds that a frame scheduled to be transmitted by a radio can remain in buffer memory.

Syntax set radio-profile name max-tx-lifetime time

name	Radio profile name.
time	Number of milliseconds. You can enter a value from 500 (0.5 second)
	through 250,000 (250 seconds).

NN47250-100 (Version 02.51)