Nortel Networks 2300 Series manual No-broadcast Disable, Proxy-arp Disable, Psk-phrase, Psk-raw

310AP Commands

Table 5: Defaults for Service Profile Parameters (continued)

		Radio Behavior When
Parameter	Default Value	Parameter Set To
		Default Value
no-broadcast	disable	Does not reduce wireless
		broadcast traffic by sending
		unicasts to clients for ARP
		requests and DHCP Offers and
		Acks instead of forwarding them
		as multicasts.
proxy-arp	disable	Does not reply on behalf of
		wireless clients to ARP requests
		for client IP addresses. Instead,
		the radio forwards the ARP
		Requests as wireless broadcasts.
psk-phrase	No passphrase defined	Uses dynamically generated keys
		rather than statically configured
		keys to authenticate WPA clients.
psk-raw	No preshared key	Uses dynamically generated keys
	defined	rather than statically configured
		keys to authenticate WPA clients.
rsn-ie	disable	Does not use the RSN IE in
		transmitted frames. (The RSN IE
		is required for 802.11i. RSN is
		sometimes called WPA2.)
shared-key-auth	disable	Does not use shared-key
		authentication.
		This parameter does not enable
		PSK authentication for WPA. To
		enable PSK encryption for WPA,
		use the set radio-profile auth-
		psk command.
short-retry-count	5	Sends a short unicast frame up to
		five times without
		acknowledgment.
soda	disable	Sygate On Demand Agent
		(SODA) files are not downloaded
		to connecting clients.
ssid-name	trapeze	Uses the SSID name trapeze.
ssid-type	crypto	Encrypts wireless traffic for the
		SSID.
static-cos	disable	Assigns CoS based on the QoS
		mode (wmm or svp) or based on
		ACLs.

NN47250-100 (Version 02.51)