Nortel Networks 2300 Series manual Output for show vlan config

100VLAN Commands

WSS# show vlan config burgundy
Admin	VLAN	Tunl	Port
VLAN Name Status	State	Affin Port	Tag State

---- ---------------- ------ ----- ----- ---------------- ----- ------------------

2 burgundy Up Up 5

2none Up

3none Up

4none Up

6 none Up

11none Up t:10.10.40.4 none Up

Table 16 describes the fields in this display.

	Table 6: Output for show vlan config
Field	Description
VLAN	VLAN number.
Name	VLAN name.
Admin Status	Administrative status of the VLAN:
	• Down—The VLAN is disabled.
	• Up—The VLAN is enabled.
VLAN State	Link status of the VLAN:
	• Down—The VLAN is not connected.
	• Up—The VLAN is connected.
Tunl Affin	Tunnel affinity value assigned to the VLAN.
Port	Member port of the VLAN. The port can be a physical port or a
	virtual port.
	• Physical ports are 10/100 Ethernet or gigabit
	Ethernet ports on the switch, and are listed by port
	number.
	• Virtual ports are tunnels to other switches in a
	mobility domain, and are listed as follows: t:ip-
	addr, where ip-addris the system IP address of
	the WSS at the other end of the tunnel.
	Note: This field can include AP access ports and wired
	authentication ports, because WSS Software dynamically adds
	these ports to a VLAN when handling user traffic for the VLAN.
Tag	Tag value assigned to the port.
Port State	Link state of the port:
	• Down—The port is not connected.
	• Up—The port is connected.

NN47250-100 (Version 02.51)