Nortel Networks 2300 Series manual Output for show service-profile, Unencrypted, Yes

392AP Commands

Enforce SODA checks:	yes	SODA remediation ACL:
Custom success web-page:		Custom failure web-page:
Custom logout web-page:		Custom agent-directory:		0
Static COS:	no COS:
CAC mode:	none	CAC sessions:		14
User idle timeout:	180	Idle client probing:		yes	5
Keep initial vlan:	no	Web Portal Session Timeout:
Web Portal ACL:	<none>		WEP Key 2 value:		<none>
WEP Key 1 value:
WEP Key 3 value:	<none>		WEP Key 4 value:		<none>
WEP Unicast Index:		1	WEP Multicast Index:		1
Shared Key Auth:	NO
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
vlan-name = orange
session-timeout = 300
service-type = 2	6.0	multicast rate:		AUTO
11a beacon rate:
11a mandatory rate:	6.0,12.0,24.0 standard rates:			9.0,18.0,36.0,48.0,54.0
11b beacon rate:	2.0	multicast rate:		AUTO
11b mandatory rate:	1.0,2.0 standard rates:			5.5,11.0
11g beacon rate:	2.0	multicast rate:		AUTO
11g mandatory rate:	1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0

Table 57 describes the fields in this display.

	Table 24: Output for show service-profile
Field	Description
ssid-name	Service set identifier (SSID) managed by this service profile.
ssid-type	SSID type:
	• crypto—Wireless traffic for the SSID is
		encrypted.
	• clear—Wireless traffic for the SSID is
		unencrypted.
Beacon	Indicates whether the radio sends beacons, to advertise the SSID:
	•	no
	•	yes
Proxy ARP	Indicates whether proxy ARP is enabled. When this feature is
	enabled, WSS Software answers ARP requests on behalf of
	wireless clients.
DHCP restrict	Indicates whether DHCP Restrict is enabled. When this feature is
	enabled, WSS Software allows only DHCP traffic for a new
	client until the client has successfully completed authentication
	and authorization.

NN47250-100 (Version 02.51)