Nortel Networks 2300 Series manual Auth-pass-phrase string option

	IP Services Commands 149
auth-type {none md5 sha} {auth-pass-phrase	Specifies the authentication type used to
string auth-keyhex-string}	authenticate communications with the remote
	SNMP engine. You can specify one of the
	following:
	• none—No authentication is used.
	• md5—Message-digest
	algorithm 5 is used.
	• sha—Secure Hashing Algorithm
	(SHA) is used.
	If the authentication type is md5 or sha, you
	can specify a passphrase or a hexadecimal
	key.
	• To specify a passphrase, use the
	auth-pass-phrase string option.
	The string can be from 8 to 32
	alphanumeric characters long,
	with no spaces.
	• To specify a key, use the auth-
	key hex-string option.
encrypt-type {none des 3des aes} {encrypt-	Specifies the encryption type used for SNMP
pass-phrase string encrypt-key hex-string}	traffic. You can specify one of the following:
	• none—No encryption is used.
	This is the default.
	• des—Data Encryption Standard
	(DES) encryption is used.
	• 3des—Triple DES encryption is
	used.
	• aes—Advanced Encryption
	Standard (AES) encryption is
	used.

If the encryption type is des, 3des, or aes, you can specify a passphrase or a hexadecimal key.

•To specify a passphrase, use the encrypt-pass-phrasestring option. The string can be from 8 to 32 alphanumeric characters long, with no spaces.

•To specify a key, use the encrypt- key hex-stringoption.

Defaults No SNMPv3 users are configured by access is read-only, and the default authentication

default. When you configure an SNMPv3 user, the default and encryption types are both none.

Access Enabled.

History Introduced in WSS Software Version 4.0.

Nortel WLAN—Security Switch 2300 Series Command Line Reference