Nortel Networks 2300 Series Show snoop stats, Clear snoop map on Set snoop map on Show snoop on

582Snoop Commands

ap: 3 Radio: 2

See Also

•clear snoop map on page 566

•set snoop map on page 568

•show snoop on page 570

show snoop stats

Displays statistics for enabled snoop filters.

Examples show snoop stats [filter-name[ap-num[radio {1 2}]]]

	filter-name			Name of the snoop filter.
	ap ap-num			Number of a AP to which the snoop filter is mapped.
	radio 1			Radio 1 of the AP.
	radio 2			Radio 2 of the AP. (This option does not apply to single-radio models.)
	Defaults		None.
	Access	Enabled.
	History Introduced in WSS Software Version 4.0.
	Usage The AP retains statistics for a snoop filter until the filter is changed or disabled. The AP then clears
	the statistics.
	Examples The following command shows statistics for snoop filter snoop1:
WSS# show snoop stats snoop1
Filter	ap Radio		Rx Match	Tx Match		Dropped	Stop-After
===============================================================================
snoop1	3	1	96	4	0	stopped

NN47250-100 (Version 02.51)