Nortel Networks 2300 Series manual Set radio-profile auto-tune channel-lockdown

292AP Commands

set radio-profile auto-tune channel-lockdown

Locks down the current channel settings on all radios in a radio profile. The channel settings that are in effect when the command is entered are changed into statically configured channel assignments on the radios. RF Auto-Tuning of channels is then disabled in the radio profile.

Syntax set radio-profile name auto-tune channel-lockdown

name Radio profile name.

Defaults By default, when RF Auto-Tuning of channels is enabled, channels continue to be changed dynamically based on network conditions.

Access Enabled.

History Introduced in WSS Software Version 5.0.

Usage To save this command and the static channel configuration commands created when you enter this command, save the configuration.

Examples The following command locks down the channel settings for radios in radio profile rp2:

WSS# set radio-profile rp2 auto-tune channel-lockdown

success: change accepted.

See Also

•set radio-profileauto-tunechannel-config on page 279

•set radio-profileauto-tunechannel-holddown on page 280

•set radio-profileauto-tunechannel-interval on page 281

•set radio-profileauto-tunepower-lockdown on page 284

•show radio-profile on page 376

set radio-profile auto-tune power-backoff-timer

Deprecated in WSS Software Version 5.0.

set radio-profile auto-tune power-config

Enables or disables dynamic power tuning (RF Auto-Tuning) for the AP radios in a radio profile.

NN47250-100 (Version 02.51)