Nortel Networks 2300 Series manual Show security acl map

474Security ACL Commands

set security acl ip acl_123 (hits #5 462)

---------------------------------------------------------

1.permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits

2.deny IP source IP 192.168.2.11 0.0.0.0 destination IP any

set security acl ip acl_134 (hits #3 0)

---------------------------------------------------------

1. permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits

set security acl ip acl_135 (hits #2 0)

---------------------------------------------------------

1. deny IP source IP 192.168.1.1 0.0.0.0 destination IP any enable-hits

The following command displays the contents of acl_123 in the edit buffer, including the committed ACE rules 1 and 2 and the uncommitted rule 3:

WSS# show security acl info acl_123 editbuffer

ACL edit-buffer information for acl_123

set security acl ip acl_123 (ACEs 3, add 3, del 0, modified 0)

---------------------------------------------------------

1.permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits

2.deny IP source IP 192.168.2.11 0.0.0.0 destination IP any

3.deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits

See Also

•clear security acl on page 449

•commit security acl on page 452

•set security acl on page 454

show security acl map

Displays the VLANs, ports, and virtual ports on the WSS to which a security ACL is assigned.

Syntax show security acl map acl-name

acl-name	Name of an existing security ACL for which to show static mapping.
	ACL names must start with a letter and are case-insensitive.

Defaults None.

Access Enabled.

Examples The following command displays the port to which security ACL acl_111 is mapped:

WSS# show security acl map acl_111

ACL acl_111 is mapped to:

Port 4 in

NN47250-100 (Version 02.51)