Nortel Networks 2300 Series manual Set snmp community

IP Services Commands 133

See Also

•clear ntp server on page 102

•clear ntp update-interval on page 103

•set ntp on page 121

•set ntp server on page 122

•show ntp on page 156

set snmp community

Configures a community string for SNMPv1 or SNMPv2c.

Note. For SNMPv3, use the set snmp usm command to configure an SNMPv3 user. SNMPv3 does not use community strings.

Syntax set snmp community name comm-string

access {read-only read-notify notify-only read-write notify-read-write}

comm-string		Name of the SNMP community. Specify between 1 and 32
		alphanumeric characters, with no spaces.
read-only		Allows an SNMP management application using the string to get
		(read) object values on the switch but not to set (write) them.
read-notify		Allows an SNMP management application using the string to get
		object values on the switch but not to set them. The switch can use
		the string to send notifications.
notify-only		Allows the switch to use the string to send notifications.
read-write		Allows an SNMP management application using the string to get
		and set object values on the switch.
notify-read-write		Allows an SNMP management application using the string to get
		and set object values on the switch. The switch also can use the
		string to send notifications.
Defaults	None.
Access	Enabled.

Nortel WLAN—Security Switch 2300 Series Command Line Reference