Nortel Networks 2300 Series Port Commands, Port Type Set port type ap on Set ap on, Clear ap on

33

Port Commands

Use port commands to configure and manage individual ports and load-sharing port groups. This chapter presents port commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Port Type	set port type ap on page 41
	set ap on page 33
	set port type wired-auth on page 44
	clear port type on page 27
	clear ap on page 24
Name	set port name on page 38
	clear port name on page 26
State	set port on page 35
	reset port on page 32
	show port status on page 51
Gigabit interface type	show port media-type on page 48
	set port media-type on page 36
	clear port media-type on page 25
Speed	set port speed on page 40
Autonegotiation	set port negotiation on page 39
PoE	set port poe on page 39
	show port poe on page 49
SNMP	set port trap on page 41
Port Groups	set port-group on page 35
	show port-group on page 47
	clear port-group on page 25
Port Mirroring	set port mirror on page 37

Nortel WLAN—Security Switch 2300 Series Command Line Reference