Show ip dns, Output for show ip alias | Nortel Networks 2300 Series

IP Services Commands 161

Table 22 describes the fields in this display.

	Table 6: Output for show ip alias

Field	Description

Name	Alias string.

IP Address	IP address associated with the alias.

show ip dns

Displays the DNS servers the WSS is configured to use.

Syntax show ip dns

Defaults None.

Access All.

Examples The following command displays the DNS information:

WSS# show ip dns

Domain Name: example.com

DNS Status: enabled

IP Address Type

-----------------------------------

10.1.1.1PRIMARY

10.1.1.2SECONDARY

10.1.2.1SECONDARY

Table 23 describes the fields in this display.

Table 7: Output for show ip dns

Field	Description

Domain Name	Default domain name configured on the WSS

DNS Status	Status of the switch’s DNS client:
	•	Enabled
	•	Disabled

Nortel WLAN—Security Switch 2300 Series Command Line Reference

Page 161

Image 161

Nortel Networks 2300 Series manual Show ip dns, Output for show ip alias, Output for show ip dns, Syntax show ip dns

Contents

Page Copyright 2007-2008 Nortel Networks. All rights reserved Nortel Networks software license agreement Legal Information Exclusive Remedy Software License Agreement Page SSH Source Code Statement OpenSSL Project License Statements NN47250-100 Version How to get help Introducing the Nortel Wlan 2300 System NN47250-102 Version Getting help from the Nortel web site How to get help How to get help NN47250-100 Version Nortel Wlan 2300 System Documentation Introducing the Nortel Wlan 2300 System Configuration and Management Planning, Configuration, and DeploymentInstallation Safety and Advisory Notices Italic text Menu Name CommandBold text CLI Conventions Using the Command-Line Interface Command Prompts Set port enable disable port-list Set enablepassClear interface vlan-idip Clear fdb dynamic port port-list vlan vlan-id MAC Address Notation MAC Address Wildcards Port Lists Command-Line Editing Using CLI Help WSS# show ip ? WSS# show i?WSS# show ip telnet Set ap port-list ap-numname name Using the Command-Line Interface NN47250-100 Version Disable Access CommandsEnable See Also enable on Syntax set enablepass Set enablepassWSS# set enablepass Enter old password old-password Quit Disable on Enable on Access Commands NN47250-100 Version Port Type Set port type ap on Set ap on Port CommandsClear port type on Clear ap on Clear port counters Clear ap Clear port media-type Clear port-group Clear port name Clear port mirror Configuration from all the specified ports Network Port DefaultsClear port type Syntax clear port type port-list WSS# clear port type Set port type ap on Set port type wired-auth onMonitor port counters WSS# monitor port counters Key Controls for Monitor Port Counters Display Octets Output for monitor port countersDisplayed for All Options Number of packets received that were 64 bytes long Syntax reset port port-list Reset portWSS# reset port See Also show port counters on See Also set port on Set ap 2380-1 to 2382-1 to2360/61-1 to 2350-1 to Set port-group See Also reset port onSet port Mode on off WSS# set port-group name server1 1-5 mode onSet port media-type Syntax set port-group name group-nameport-listmode on off Syntax set port media-type port-listrj45 Set port mirror2380# set port media-type 2 rj45 Syntax set port mirror source-portobserver observer-port Set port name WSS# set port 17 name adminpoolWSS# set port 1 observer Syntax set port port name name Set port poe Set port negotiation WSS# set port poe 7,9 enable WSS# set port poe 7,9 disableSet port speed Syntax set port speed port-list10 100 1000 auto WSS# set port trap 17-18 enable Syntax set port trap port-listenable disableSet port trap Set port type ap Radiotype 11a 11b 11g Radio type Port-listList of physical ports Version New values for model option added AP Access Port Defaults WSS# set port type ap 2 model 2330 poe enable Set port type wired-authWSS# set port type ap 4-6 model 2330 poe enable WSS# set ap 1 radio 1 antennatype Last-resort Wired Authentication Port DefaultsNone Web-portal Show port counters WSS# set port type wired-authClear port type on Set port type ap on Port port-list Output for show port-group Show port-groupWSS show port counters octets port Syntax show port-group name group-name RJ45-The RJ-45 copper interface is enabled GBIC-The Gbic fiber interface is enabledShow port media-type Output for show port media-type Show port poe Show port mirror See Also set port poe on Output for show port poe Output for show port status Show port statusSyntax show port status port-list WSS# show port status Down-The port is disabled Up-The port is enabledWa-Wired authentication port No connector-GBIC slot is empty System Services Commands See Also history on Clear banner motdClear history Clear system Clear promptSyntax clear prompt Wildebeest# clear prompt success change accepted. WSS# WSS# clear system location HelpHelp None History Set auto-configQuickstart See Also clear history on Syntax set auto-config enable disable WSS# save config WSS# set auto-config enable success change acceptedSet banner motd 2360# set vlan 1 port 7 success change accepted Set length Set confirm Syntax set length number-of-lines Set licenseWSS# set length Syntax set license activation-key Set system contact Set promptSee Also show licenses on Syntax set prompt string 23x0#set system contact tamara@example.com Set system countrycodeSyntax set system countrycode code 23x0#set system country code CA See Also show config on Set system idle-timeoutSyntax set system idle-timeout seconds WSS# set system idle-timeout Set system location Set system ip-address Syntax set system name string Set system name Show licenses Show banner motdShow load See Also set license on Show system Show license commandSee Also show system on Syntax show system Show system output Show tech-support System Services Commands System Services Commands NN47250-100 Version Vlan Commands WSS# clear fdb static vlan blue Clear fdbWSS# clear fdb dynamic WSS# clear fdb port 3,5 Clear security l2-restrict counters Clear security l2-restrictSyntax clear security l2-restrict counters vlan vlan-idall All WSS# clear security l2-restrict counters vlan abcair Clear vlanSyntax clear vlan vlan-id port port-list tag tag-value Vlan-id Port port-list Set fdb Set vlan port on Show vlan config onWSS# clear vlan green port WSS# clear vlan red port 4 tag See Also show fdb agingtime on Set fdb agingtimeSet security l2-restrict Set vlan name Enable disableSyntax set vlan vlan-numname name Mode See Also set vlan port on Set vlan portWSS# set vlan 3 name marigold Syntax set vlan vlan-id port port-list tag tag-value Show fdb Set vlan tunnel-affinityWSS# set vlan beige port 16 tag Syntax set vlan vlan-idtunnel-affinity num WSS# show fdb WSS# show fdb all Output for show fdb Show fdb agingtimeSyntax show fdb agingtime vlan vlan-id WSS# show fdb agingtime Show roaming station Show fdb countSee Also set fdb agingtime on See Also show fdb on See Also show roaming vlan on Show roaming vlanOutput for show roaming station WSS# show roaming vlan Syntax show roaming vlan Show security l2-restrict Show roaming station on Show vlan config onOutput for show roaming vlan Syntax show security l2-restrict vlan vlan-idall Disabled. Layer 2 forwarding is not restricted Enabled. Forwarding of Layer 2 traffic from clients isShow tunnel Output for show security l2-restrict See Also show vlan config on Show vlan configSyntax show vlan config vlan-id Output for show tunnel Output for show vlan config See Also Vlan Commands NN47250-100 Version Clear qos Quality of Service Commands WSS# clear qos Set qos cos-to-dscp-mapWSS# clear qos dscp-to-qos-map Syntax set qos cos-to-dscp-map level dscp dscp-value Show qos Set qos dscp-to-cos-map See Also show qos on Show qos dscp-tableSee Also show qos dscp-table on IP Services Commands Set ntp on Set ntp update-interval onSet ntp server on Show ntp on WSS# clear interface mauve ip Clear interfaceSyntax clear interface vlan-idip Clear ip dns domain Clear ip alias Clear ip route Clear ip dns serverSyntax clear ip dns server ip-addr WSS# clear ip dns server Clear ntp server Clear ip telnetSyntax clear ip telnet WSS# clear ip telnet success change accepted Syntax clear ntp update-interval Clear ntp update-intervalWSS# clear ntp update-interval success change accepted Clear snmp community Clear snmp notify target Clear snmp notify profileSyntax clear snmp notify profile profile-name Syntax clear snmp notify target target-num Clear summertime Clear snmp usm Clear timezone Clear system ip-address Count-5 PingHost Count num-packets See Also traceroute on Set arpWSS# ping Syntax set arp permanent static dynamic ip-addrmac-addr Set interface Set arp agingtimeSyntax set arp agingtime seconds WSS# set arp agingtime Syntax set interface vlan-idip dhcp-client enable disable WSS# set interface default ip 10.10.10.10/24Enables the Dhcp client on the Vlan Set interface dhcp-client Default-router ip-addr WSS# set interface corpvlan ip dhcp-client enableSet interface dhcp-server Clear interface on Show dhcp-client on Show interface on Set interface status Default-routerDns-domain Primary-dns and secondary-dns Set ip alias Syntax set ip dns enable disableSet ip dns Syntax set ip alias name ip-addr Set ip dns domain WSS# set ip dns enableSyntax set ip dns domain name WSS# set ip dns domain example.com Syntax set ip dns server ip-addrprimary secondary Set ip dns serverPrimary Secondary WSS# set ip https server enable Syntax set ip https server enable disableEnable Enables the Https server Disable Set ip https server WSS# set ip route 192.168.5.0/24 10.5.5.2 WSS# set ip route default 10.5.4.1WSS# set ip route 192.168.4.0 255.255.255.0 10.5.4.2 WSS# set ip snmp server enable Syntax set ip snmp server enable disableSet ip snmp server Set ip ssh Set ip ssh server Syntax set ip ssh server enable disableWSS# set ip ssh port Crypto generate key on Set ip ssh on Set ip ssh server on Set ip telnet Syntax set ip telnet server enable disableSet ip telnet server Syntax set ip telnet port-num Syntax set ntp enable disable WSS# set ip telnet server enableWSS# set ntp enable Enable Enables the NTP client Disable Set ntp server Set ntp update-interval Set snmp community WSS# set snmp community read-write goodcommunity WSS# set snmp community name switchmgr1 notify-read-writeRead-notify Notify-only Notify-read-write Drop send Default profile-nameSet snmp notify profile ClientAuthorizationSuccessTraps-Generated AutoTuneRadioPowerChangeTraps-GeneratedClientAuthenticationFailureTraps-Generated ApOperRadioStatusTraps-Generated when Cont RFDetectUnAuthorizedSsidTraps-Generated RFDetectSpoofedSsidAPTraps-Generated when See Also Show snmp notify profile on Set snmp notify target Security unsecured authenticated encryptedSNMPv3 with Informs Snmp-engine-id Timeout num Security unsecured authenticated encryptedRetries num SNMPv3 with Traps SNMPv2c with Traps SNMPv2c with InformsCommunity-string Community string Profile profile-name SNMPv1 with Traps WSS# set snmp notify target 2 10.10.40.10 v1 trap WSS# set snmp protocol all enable Syntax set snmp protocol v1 v2c usm all enable disableSet snmp protocol V2c WSS# set snmp security encrypted Set snmp securitySet snmp usm Specifies a unique identifier for the Snmp Snmp-engine-id ip ip-addr local hex hexString Engine Allow get and set operations and so on Specifies the access level of the user Auth-pass-phrase string option WSS# set snmp usm snmpmgr1 snmp-engine-id local Set summertimeStart Second , third , fourth , or last End of the time change period 23x0# set summertime PDT success change acceptedEnd Mmm-month Set timedateDd-day Yyyy-year 23x0# set timezone PST Set timezoneSyntax set timezone zone-name -hours minutes Output for show arp Show arpSyntax show arp ip-addr WSS# show arp Show dhcp-client WSS# show dhcp-client Output for show dhcp-client See Also set interface dhcp-client on Show dhcp-serverSyntax show dhcp-server interface vlan-id verbose WSS# show dhcp-server Output for show dhcp-server verbose Output for show dhcp-server See Also set interface dhcp-server on Show interfaceSyntax show interface vlan-id WSS# show interface Output for show interface Show ip alias Output for show ip alias Show ip dnsOutput for show ip dns Syntax show ip dns WSS show ip https Show ip httpsShow ip https Output for show ip https Show ip routeSyntax show ip route destination Destination Output for show ip route WSS show ip telnet Show ip telnetShow ip telnet Output for show ip telnet Show ntpSyntax show ntp WSS show ntp Synced Output for show ntp Show snmp notify profile Show snmp communityShow snmp counters Show snmp status Show snmp notify targetSyntax show snmp notify target Syntax show snmp status Show summertime Show snmp usmSyntax show summertime 23x0# show summertime Show timezone Show timedate Syntax telnet ip-addr hostname port port-num TelnetWSS# telnet WSS-remote show vlan WSS-remote Session 0 pty tty2.d terminated tt name tty2.d Traceroute WSS# traceroute server1 Error Messages for tracerouteSee Also ping on AAA Commands Clear accounting Syntax clear accounting admin dot1x system user-wildcard Syntax clear authentication admin user-wildcard Clear authentication adminWSS# clear accounting dot1x Nin System WSS# clear authentication admin Jose Clear authentication consoleSyntax clear authentication console user-wildcard WSS# clear authentication console Regina Clear authentication last-resort Clear authentication dot1xWSS# clear authentication dot1x ssid finance *@thiscorp.com Wired Clear authentication proxy Clear authentication macWSS# clear authentication mac ssid thatcorp aabbcc WSS# clear authentication proxy ssid mycorp Set authentication proxy on Show aaa on Clear authentication webClear location policy Syntax clear location policy rule-number Clear mac-user attr Clear mac-userWSS# clear location policy Syntax clear mac-user mac-addr Syntax clear mac-usermac-addr attr attribute-name Clear mac-user groupWSS# clear mac-user 010203040506 attr filter-id Syntax clear mac-user mac-addrgroup Clear mac-usergroup attr Clear mac-usergroupSyntax clear mac-usergroup group-name WSS# clear mac-usergroup eastcoasters Clear user Clear mobility-profile Clear user attr WSS# clear user Hosni attr session-timeoutWSS# clear user Nin Syntax clear user username attr attribute-name Clear usergroup Clear user group Clear usergroup attr Set accounting admin consoleSyntax clear usergroup group-name attr attribute-name WSS# clear usergroup cardiology attr time-of-day Set accounting dot1x mac web last-resort WSS# set accounting admin Natasha start-stop localStart-stop Stop-only Method1 Method2 Method3 Method4 Mac Method1 method2 method3 method4Web Ssid ssid-name WSS# set accounting system shorebirds Set accounting systemWSS# set accounting dot1x Nin stop-only sg2 For more information, see Usage Set authentication admin WSS# set authentication admin Jose sg3 Set authentication console User-wildcard Method1 Method2 Method3 Method4 WSS# set authentication console * none Set authentication dot1x Bonded Already been authenticatedOr a period .. For details, see User Wildcards on Protocol Method1 Method2 Method3 Method4 Sg1 sg2 sg3 success change accepted Set authentication mac Set authentication last-resortSet service-profileauth-fallthru on Show aaa on Wired WSS# set authentication ssid mycorp2 mac ** local Set authentication proxy WSS# set authentication proxy ssid mycorp ** srvrgrp1 Set authentication web WSS# set authentication web ssid ourcorp rnd* local Deny Set location policyPermit Optionally, you can add the suffix .out to the name Clear location policy rule-numbercommand Show location policy commandEq-Applies the location policy rule to all usernames Neq-Applies the location policy rule to all usernames WSS# set location policy deny if user eq *.theirfirm.com Set mac-userWSS# set location policy permit vlan floor2 if port 3-7,12 Clear location policy on Show location policy on Clear mac-user on Show aaa on Syntax set mac-user mac-addrgroup group-nameWSS# set mac-user 010203040506 group eastcoasters Syntax set mac-usermac-addr attr attribute-name value Set mac-user attr End-date Authentication Attributes for Local UsersEncryption-type Mobility-profile on Filter-idMobility-profile Session-timeout Service-typeBy the set dot1x reauth-period command is Ssid 1600,th1000-1600 Time-of-dayDay wk0900-1700,sa2200-0200 With start-date,end-date, or both WSS# set mac-user 010203040506 attr filter-id acl-03.in $u-Username $v-VLAN $s-SSID $p-Service profile nameUrl Vlan-name Set mac-usergroup attr For a list of authorization attributes, see onWSS# set mac-usergroup eastcoasters attr vlan-name orange Clear mac-user attr on Show aaa on Set mobility-profile Or wired authentication port on the WSSPorts and wired authentication port on the WSS Syntax set mobility-profile mode enable disable Set mobility-profile modeWSS# set mobility-profile mode enable WSS# set mobility-profile name magnolia port WSS# set user Nin password goody Syntax set user username password encrypted stringWSS# set user admin password chey3nne Set user Set user attr WSS# set user Nin password 29Jan04WSS# set user Tamara attr vlan-name orange WSS# set user Tamara attr mobility-profile tulip Set usergroup Set user groupSyntax set user username group group-name WSS# set user Hosni group cardiology Set web-portal Syntax set web-portal enable disableSyntax set usergroup group-name attr attribute-name value Clear usergroup on Clear usergroup attr on Show aaa on Show aaa User Nin Show aaa Output UP operating Show accounting statistics WSS# show accounting statistics Syntax show accounting statistics Local WSS database Show accounting statistics OutputRadius server Show mobility-profile Show location policy AAA Commands NN47250-100 Version Clear domain security Mobility Domain CommandsSyntax clear domain security 23x0# clear domain security Clear mobility-domain member Clear mobility-domainSet domain security See Also set mobility-domain member on Syntax set domain security none required Set mobility-domain memberWSS# set domain security required Syntax set mobility-domain member ip-addrkey hex-bytes Set mobility-domain mode member secondary-seed- ip Set mobility-domain mode member seed-ipClear mobility-domain on Show mobility-domain config on WSS# set mobility-domain member Clear mobility-domain member on Show mobility-domain on Set mobility-domain mode seed domain-nameWSS# set mobility-domain mode member secondary-seed-ip Syntax show mobility-domain config Show mobility-domain configWSS# show mobility-domain config Show mobility-domain WSS# show mobility-domain Show mobility-domain OutputSyntax show mobility-domain Mobility Domain Commands NN47250-100 Version Clear network-domain Network Domain CommandsSyntax clear network-domain 23x0# clear network-domain Syntax clear network-domain mode seed member Clear network-domain modeClear network-domain peer Syntax clear network-domain peer ip-addrall See Also set network-domain mode member seed-ip on Set network-domain mode member seed-ipClear network-domain seed-ip See Also set network-domain peer on Set network-domain peer WSS# set network-domain mode member seed-ipSyntax set network-domain peer ip-addr Clear network-domain on Show network-domain on WSS# set network-domain mode seed domain-name California Set network-domain mode seed domain-nameSet network domain peer command Show network-domain Syntax show network-domain Show network-domain OutputWSS# show network-domain Output if WSS is the Network Domain seed Output if WSS is a Network Domain member Network Domain Commands NN47250-100 Version Set ap radio mode on AP CommandsSet ap upgrade-firmware on Set ap radio radio-profile on Set service-profileauth-psk on Set service-profileweb-portal-acl onSet service-profilewpa-ie on Set service-profilersn-ie on Set service-profile cipher-wep40 on Set service-profile cipher-wep104 onSet service-profile psk-phrase on Set service-profile psk-raw on Set radio-profileauto-tunepower-interval on Set radio-profileauto-tunepower-config onSet radio-profileauto-tunepower-lockdown on Set ap radio auto-tunemax-power on Syntax clear ap ap-numberimage Clear ap image Syntax clear ap ap-numberlocal-switching vlan-profile Clear ap local-switching vlan-profileWSS# clear ap 7 local-switching vlan-profile See Also set ap image on Radio-Specific Parameters Clear ap radioSyntax clear ap port-listap ap-numradio 1 2 all Radio 802.11a-Lowest valid 802.11b/g-6Channel number for Country of operation Option dap removed for AP Syntax clear ap boot-configuration ap-num Clear ap boot-configurationWSS# clear ap 1 boot-configuration Clear ap radio load-balancing group Clear radio-profile Long-retry Clear service-profileShort-retry Countermeasures parameter added Soda remediation-acl Soda failure-pageSoda success-page Soda logout-page Set ap auto Reset apOption force-image-download added Option radio num auto-tune min-client-rate WSS# set ap auto Configurable Profile Parameters for APs Syntax set ap auto mode enable disable Set ap auto modeWSS# set ap auto mode enable Set ap auto persistent 11a-802.11a Set ap auto radiotypeSyntax set ap auto persistent ap-numall WSS# set ap auto persistent 10 success change accepted Syntax set ap port-listap ap-numauto bias high low Set ap biasWSS# set ap auto radiotype 11b Syntax set ap port-list ap ap-num auto blink enable disable See Also show ap config onSet ap blink WSS# set ap 1 bias low WSS# set ap 3-4 blink enable Set ap boot-configuration ipMode enable disable Enables or disables the static IP address for the AP WSS# set ap 7 boot-configuration mesh mode enable Set ap boot-configuration mesh modeSet ap boot-configuration mesh psk-phrase Syntax set ap ap-numberboot-configuration mesh psk-raw hex Set ap boot-configuration mesh psk-raw WSS# set ap 7 boot-configuration mesh ssid wlan-mesh Set ap boot-configuration mesh ssid Switch-ip ip-addr Set ap boot-configuration switch Enables or disables use of the specified Vlan tag on the AP Set ap boot-configuration vlanVlan-tag tag-value Vlan tag value. You can specify a number from Set ap fingerprint Set ap security on Show ap config on Show ap status onSet ap force-image-download Syntax set ap num fingerprint hex Set ap group WSS# set ap 69 force-image-download enableSyntax set ap port-list ap ap-num auto group name Auto on Set ap image Show ap config on Show ap group onWSS# set ap 1,4,7 group loadbalance1 WSS# set ap 4 group none Set ap local-switching vlan-profile Set ap local-switching modeSyntax set ap ap-numberlocal-switching mode enable disable WSS# set ap 7 local-switching mode enable Syntax set ap port-list ap ap-numname name WSS# set ap 7 local-switching vlan-profile localsSet ap name WSS# set ap 1 name techpubs Set ap radio antenna-locationWSS# set ap 22 radio 1 antenna-location outdoor Indoors See Also set ap radio antennatype on Set ap radio antennatype Ap port-list Ap ap-num radio 1 radio Set ap radio auto-tune max-power Set ap radio auto-tune max-retransmissions WSS# set ap 7 radio 1 auto-tune max-powerSet ap radio auto-tune min-client-rate Deprecated in WSS Software Version Set ap radio tx-power on Show ap config on WSS# set ap 11 radio 1 channel 1 tx-powerSet ap radio channel WSS# set ap 5 radio 1 channel Set ap radio link-calibration Set ap radio min-tx-datarateSet ap radio load-balancing Ap ap-number Set ap radio load-balancing group Syntax set ap ap-numradio 1 2 load-balancing enable disableWSS# set ap 7 radio 1 load-balancing disable WSS# set ap 7 radio 1 load-balancing group room1 Set ap radio modeSyntax set ap port-listauto radio 1 2 mode enable disable WSS# set ap 1-3 radio 2 mode enable WSS# set ap 1-5 radio 1 mode enableSet ap radio radio-profile Radio-profile name Set ap radio tx-power Set ap radio channel on Show ap config on WSS# set ap 5 radio 1 tx-power WSS# set ap security none Set ap securitySyntax set ap security require optional none Syntax set ap port-listauto upgrade-firmware enable disable Set ap upgrade-firmwareWSS# set ap 9 upgrade-firmware disable Set ap sticky-bit Syntax set load-balancing mode enable disable Set load-balancing modeSyntax set band-preference none 11bg 11a WSS# set band-preference 11a Set load-balancing strictness WSS# set load-balancing mode disableSyntax set load-balancing strictness low med high max Max Set radio-profile 11g-only Syntax set radio-profile name active-scan enable disableSet radio-profile active-scan WSS# set load-balancing strictness max WSS# set radio-profile radprof3 active-scan disable Set radio-profile auto-tune channel-configSet radio-profile auth-dot1x Set radio-profile auth-psk WSS# set radio-profile rp2 auto-tune channel-holddown WSS# set radio-profile rp2 auto-tune channel-config disableSet radio-profile auto-tune channel-holddown WSS# set radio-profile rp2 auto-tune channel-interval Set radio-profile auto-tune channel-interval Set radio-profile auto-tune power-config Set radio-profile auto-tune power-backoff-timerSet radio-profile auto-tune channel-lockdown Syntax set radio-profile name auto-tune channel-lockdown WSS# set radio-profile rp2 auto-tune power-config enable Set radio-profile auto-tune power-intervalDefaults The default power tuning interval is 300 seconds Started WSS# set radio-profile rp2 auto-tune power-interval Set radio-profile auto-tune power-lockdownSyntax set radio-profile name auto-tune power-lockdown WSS# set radio-profile rp2 auto-tune power-lockdown WSS# set radio-profile rp2 auto-tune power-ramp-interval Set radio-profile auto-tune power-ramp-intervalSet radio-profile beacon-interval Syntax set radio-profile name beacon-interval interval Set radio-profile cipher-ccmp Set radio-profile beaconed-ssidSet radio-profile cipher-tkip Set radio-profile cipher-wep104 Set radio-profile countermeasures ConfiguredWSS# set radio-profile radprof3 countermeasures rogue Rogue Set radio-profile dtim-interval Set radio-profile crypto-ssid WSS# set radio-profile rp1 frag-threshold Set radio-profile frag-thresholdSyntax set radio-profile name frag-threshold threshold Set radio-profile max-tx-lifetime Set radio-profile long-retrySet radio-profile max-rx-lifetime Defaults for Radio Profile Parameters Set radio-profile modeSyntax set radio-profile name mode enable disable WSS# set radio-profile rp1 max-tx-lifetime Service-profile Rfid-mode DisableWmm-powersave Disable Countermeasures Rfid-mode Wmm-powersave11g-only Set radio-profile psk-phrase Set radio-profile preamble-lengthSet radio-profile psk-raw Syntax set radio-profile name preamble-length long short Set radio-profile rate-enforcement Set radio-profile qos-modeSyntax set radio-profile name qos-mode svp wmm WSS# set radio-profile rp1 qos-mode svp Set radio-profile rfid-mode Enables data rate enforcement for the radios in the radioDisables data rate enforcement for the radios in the radio WSS# set radio-profile rfid-mode enable Syntax set radio-profile name rfid-mode enable disableSet radio-profile rts-threshold Syntax set radio-profile name rts-threshold threshold Syntax set radio-profile name service-profile name Set radio-profile service-profileDefaults for Service Profile Parameters Cipher-tkip Enable Cipher-ccmp DisableCipher-wep104 Disable Cipher-wep40 Disable Proxy-arp Disable No-broadcast DisableRsn-ie Disable Shared-key-auth Disable Auto 12.0,24.02.0 2.0,5.5,11.0 Timeout Portal-acl settingWpa-ie Disable Web-portal-acl Portalacl WSS# set radio-profile rp2 service-profile wpaclients Set radio-profile short-retry Set radio-profile shared-key-authSet radio-profile tkip-mc-time Set radio-profile wep active-multicast-index Syntax set radio-profile name wmm-powersave enable disable Set radio-profile wmm-powersaveWSS# set radio-profile rp1 wmm-powersave enable See set service-profilewpa-ie on WSS# set service-prof sp2 attr vlan-name blue Set service-profile attrSyntax set service-profile name attr attribute-name value WSS# set service-prof sp2 attr mobility-profile tulip Set service-profile auth-dot1xSyntax set service-profile name auth-dot1x enable disable WSS# set service-profile wpaclients auth-dot1x disable Web-portal Set service-profile auth-fallthruLast-resort WSS# set service-profile rndlab auth-fallthru web-portal Set service-profile auth-pskSyntax set service-profile name auth-psk enable disable WSS# set service-profile wpaclients auth-psk enable Set service-profile bridging Set service-profile beaconSyntax set service-profile name beacon enable disable Mesh-service-profile Mesh service profile Syntax set service-profile name cac-mode none session Set service-profile cac-modeWSS# set service-profile sp1 cac-mode session Set service-profilecac-session on Show service-profile on Set service-profile cipher-ccmp Set service-profile cac-sessionSyntax set service-profile name cac-session max-sessions WSS# set service-profile sp1 cac-session WSS# set service-profile sp2 cipher-ccmp enable Set service-profile cipher-tkipSyntax set service-profile name cipher-tkip enable disable WSS# set service-profile sp2 cipher-tkip disable Enables 104-bit WEP encryption for WPA clients Set service-profile cipher-wep104WSS# set service-profile sp2 cipher-wep104 enable Set service-profile cos Set service-profile cipher-wep40Syntax set service-profile name cipher-wep40 enable disable WSS# set service-profile sp2 cipher-wep40 enable Syntax set service-profile name cos level Set service-profile dhcp-restrictWSS# set service-profile sp1 cos WSS# set service-profile sp1 dhcp-restrict enable Set service-profile keep-initial-vlan Set service-profile idle-client-probingWSS# set service-profile sp1 idle-client-probing disable Enables keepalives WSS# set service-profile sp3 keep-initial-vlan enable Set service-profile load-balancing-exemptSee Also show service-profile on WSS# set service-profile sp3 load-balancing-exempt enable Set service-profile long-retry-countSyntax set service-profile name long-retry-count threshold WSS# set service-profile sp1 long-retry-count Set service-profile no-broadcast Set service-profile meshSyntax set service-profile name mesh mode enable disable Enables mesh services for the service profile Syntax set service-profile name no-broadcast enable disable Set service-profile proxy-arpWSS# set service-profile sp1 no-broadcast enable Syntax set service-profile name proxy-arp enable disable Syntax set service-profile name psk-phrase passphrase Set service-profile psk-phraseWSS# set service-profile sp1 proxy-arp enable Syntax set service-profile name psk-raw hex Set service-profile psk-rawSet service-profile rsn-ie WSS# set service-profile sprsn rsn-ie enable Set service-profile shared-key-authSyntax set service-profile name rsn-ie enable disable WSS# set service-profile sp4 shared-key-auth enable Set service-profile short-retry-countSyntax set service-profile name short-retry-count threshold WSS# set service-profile sp1 short-retry-count Network Set service-profile soda agent-directorySet service-profile soda enforce-checks WSS# set service-profile sp1 enforce-checks disable Set service-profile soda failure-pageSyntax set service-profile name soda failure-page Set service-profile soda mode on Show service-profile on Syntax set service-profile name soda logout-page Set service-profile soda logout-page WSS# set service-profile sp1 soda logout-page logout.html Set service-profile soda modeSyntax set service-profile name soda mode enable disable WSS# set service-profile sp1 soda mode enable Syntax set service-profile name soda success-page Set service-profile soda remediation-aclSet service-profile soda success-page Syntax set service-profile name ssid-name ssid-name Set service-profile ssid-nameWSS# set service-profile sp1 soda success-page success.html Set service-profile static-cos Set service-profile ssid-typeWSS# set service-profile clearwlan ssid-name guest Syntax set service-profile name ssid-type clear crypto Syntax set service-profile name static-cos enable disable Set service-profile tkip-mc-timeWSS# set service-profile sp1 static-cos enable Syntax set service-profile name tkip-mc-time wait-time 11g-1.0, 2.0, 5.5, 6.0, 9.0, 11.0, 12.0, 18.0 Set service-profile transmit-ratesWSS# set service-profile sp3 tkip-mc-time Beacon-rate Beacon-rate rateMulticast-rate Set service-profile web-portal-acl Set service-profile user-idle-timeoutSyntax set service-profile name user-idle-timeout seconds WSS# set service-profile sp1 user-idle-timeout Syntax set service-profile name web-portal-acl aclname Set service-profile web-portal-formWSS# set service-profile sp3 web-portal-acl creditsrvr Syntax set service-profile name web-portal-form url WSS# dir corpa WSS# mkdir corpa Set service-profile web-portal-logout logout-url Set service-profile web-portal-logoutSet service-profile web-portal-session-timeout WSS# set service-profile sp1 web-portal-logout mode enable WSS# set service-profile sp1 web-portal-session-timeout Set service-profile wep active-multicast-index WSS# set service-profile sp2 wep active-unicast-index Set service-profile wep active-unicast-indexWSS# set service-profile sp2 wep active-multicast-index Set service-profile wpa-ie Set service-profile wep key-indexSyntax set service-profile name wep key-index num key value WSS# set service-profile sp2 wep key-index 1 key aabbccddee Show ap arp WSS# set service-profile sp2 wpa-ie enableSyntax show ap arp ap-number WSS# show ap arp Syntax show ap config port-listradio 1 Show ap configSet ap local-switching mode on Set vlan-profile Output for show ap arp WSS# show ap config Output for show ap config 802.11g 802.11a802.11b Show ap counters Show ap unconfigured on Show radio-profile onSyntax show ap counters port-listradio 1 WSS# show ap counters Output for show ap counters Use the show sessions network session-id session-idcommand Output for show ap counters See Also show sessions network on Show ap dual-home Output for show ap fdb Show ap fdbSyntax show ap fdb ap-number WSS# show ap fdb Clears the counters after displaying their current values Show ap qos-statsWSS# show ap qos-stats Output for show ap qos-stats Show ap etherstatsSyntax show ap etherstats port-listap-num WSS# show ap etherstats Output for show ap etherstats Show ap mesh-links Show ap groupSyntax show ap mesh-links ap-number WSS# show ap mesh-links Output for show ap mesh-links Show ap statusSyntax show ap status terse port-listall radio 1 Terse Configured antenna model number Radio state information, to indicate when anPower settings that are configured by RF Auto Tuning WSS# show ap status terse Output for show ap status Booting-The AP has asked the WSS for a boot But has not yet begun bootingImage downloading-The AP is receiving a boot Image downloaded-The AP has received a boot Has received configuration parameters for Configure succeed state indicates that the APProtection mode remains in effect until Sweep Mode indicates that a disabled radio is Antenna is configured on the radio but no But no external antenna is configured onIndicates that an external antenna was detected Radio Output for show ap status terse and show ap status terse Show ap vlan Output for show ap vlan Set vlan-profile Set ap local-switching mode onSyntax show ap vlan ap-number WSS# show ap vlan Output for show auto-tune attributes Show auto-tune attributesSyntax show auto-tune attributes ap ap-numradio 1 2all WSS# show auto-tune attributes ap 2 radio Syntax show auto-tune neighbors ap ap-numradio 1 2all Set radio-profileauto-tunepower-backoff-timer onShow auto-tune neighbors Rssi Output for show auto-tune neighbors Output for show ap boot-configuration Show ap boot-configurationSyntax show ap boot-configuration ap-num WSS# show ap boot-configuration Syntax show ap connection ap-numserial-id serial-ID Show ap connectionConnection Serial-id serial-ID Output for show ap connection Show ap config on Show ap global on Show ap unconfigured onWSS# show ap connection Total number of entries WSS# show ap connection serial-id Output for show ap global Show ap globalSyntax show ap global ap-numserial-id serial-ID WSS# show ap global WSS# show ap unconfigured Show ap unconfiguredSyntax show ap unconfigured This WSS switch as a member Output for show ap unconfiguredShow load-balancing group Show ap connection on Show ap global on Output for show load-balancing group Show radio-profileWSS# show load-balancing group blue Syntax show radio-profile name ? WSS# show radio-profile default Output for show radio-profile Priority handling for WMM devices Wmm-AP forwarding queues provide standardSvp-AP forwarding queues are optimized for SpectraLink Voice Priority SVP Syntax show service-profile name ? Show service-profile Profile output Crypto-Wireless traffic for the Ssid is Output for show service-profileClear-Wireless traffic for the Ssid is Unencrypted Allows access to the Ssid requested by Last-resort-Automatically authenticates the userUser, without requiring a username and password None-Denies authentication and prohibits None-The key is not configured None-CAC is disabledPreset-The key is configured Session-CAC is based on the number of active Authentication-Lists the authentication methods Radios in the radio profile mapped to this service802.1X-dynamic authentication PSK-preshared key authentication FieldDescription AP Commands AP Commands NN47250-100 Version Show spantree uplinkfast on STP CommandsSet spantree uplinkfast on Clear spantree portpri Clear spantree portcost Clear spantree portvlanpri Resets the cost for all VLANsClear spantree portvlancost Syntax clear spantree portvlanpri port-listall vlan vlan-id Clear spantree statisticsSyntax clear spantree statistics port-listvlan vlan-id WSS# clear spantree statistics 5,11,19-22 Set spantree backbonefast Set spantreeSee Also show spantree statistics on See Also show spantree on See Also show spantree backbonefast on Set spantree fwddelaySet spantree hello Set spantree portcost Set spantree maxage Syntax set spantree portfast port port-listenable disable Snmp Port Path Cost DefaultsSet spantree portfast WSS# set spantree portcost 3,4 cost See Also show spantree portfast on Set spantree portpriSet spantree portvlancost WSS# set spantree portvlancost 3,4 cost 20 vlan mauve Set spantree portvlanpriCost cost All Priority value All Set spantree uplinkfast Set spantree priority WSS# show spantree vlan default WSS# set spantree uplinkfast enableShow spantree See Also show spantree uplinkfast on Bridge Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec Output for show spantree Syntax show spantree backbonefast Show spantree backbonefastSee Also show spantree blockedports on Show spantree blockedports WSS# show spantree blockedports vlan defaultSee Also set spantree backbonefast on WSS# show spantree backbonefast Syntax show spantree portfast port-list Show spantree portfastWSS# show spantree portfast Uplink fast convergence information for all ports Output for show spantree portfast Show spantree portvlancostSee Also set spantree portfast on Syntax show spantree portvlancost port-list Syntax show spantree statistics port-listvlan vlan-id Show spantree statisticsWSS# show spantree statistics Statistics for all ports Inactive Output for show spantree statistics Output for show spantree statistics Output for show spantree statistics Output for show spantree uplinkfast Show spantree uplinkfastSee Also clear spantree statistics on Syntax show spantree uplinkfast vlan vlan-id See Also set spantree uplinkfast on STP Commands NN47250-100 Version Clear igmp statistics Igmp Snooping CommandsSyntax clear igmp statistics vlan vlan-id Statistics Show igmp statistics on Clear igmp statistics on Set igmp lmqi Set igmpSee Also show igmp statistics on See Also show igmp on See Also show igmp mrouter on Set igmp mrouterSet igmp mrsol Set igmp oqi Set igmp mrsol mrsiSee Also set igmp mrsol mrsi on See Also set igmp mrsol on Set igmp proxy-report Syntax set igmp proxy-report enable disable vlan vlan-idWSS# set igmp oqi 200 vlan orange Vlan vlan-id Set igmp qi WSS# set igmp proxy-report disable vlan orangeSet igmp qri Syntax set igmp qi seconds vlan vlan-id Set igmp querier Syntax set igmp querier enable disable vlan vlan-idSyntax set igmp qri tenth-seconds vlan vlan-id WSS# set igmp qri 50 vlan orange Set igmp rv Set igmp receiverSee Also show igmp querier on See Also show igmp receiver-table on WSS# set igmp rv 4 vlan orange Show igmpSyntax show igmp vlan vlan-id WSS# show igmp vlan orange Dvmrp PIM Output for show igmp Administrator Conf Static multicast port configured by anMadv-Multicast advertisement Quer-IGMP query WSS# show igmp mrouter vlan orange Show igmp mrouterSyntax show igmp mrouter vlan vlan-id Output for show igmp mrouter Show igmp querierSyntax show igmp querier vlan vlan-id Set igmp mrouter on Show igmp mrouter on WSS# show igmp querier vlan orange Show igmp receiver-table WSS# show igmp querier vlan defaultOutput for show igmp querier See Also set igmp querier on WSS# show igmp receiver-table group 237.255.255.0/24 WSS# show igmp receiver-table vlan orangeWSS Software displays the multicast receivers on all VLANs Output for show igmp receiver-table Show igmp statisticsSee Also set igmp receiver on Syntax show igmp statistics vlan vlan-id Output for show igmp statistics See Also clear igmp statistics on Igmp Snooping Commands NN47250-100 Version WSS# clear sessions admin Session Management CommandsClear sessions WSS# clear sessions console See Also show sessions on Clear sessions networkWSS# clear sessions telnet client WSS# clear sessions network mac-addr Show sessions Telnet Console Show sessions telnet client Output Show sessions networkSee Also clear sessions on Mac-addr mac-addr Session-id output Verbose output WSS show sessions network mac-addr 00055d7e981a WSS show sessions networkWSS show sessions network user E WSS show sessions network verbose WSS# show sessions network session-id Show sessions network summary Output Description Additional show sessions network verbose Serial number and radio number of the AP IP address and port number of the WSS managing the APAmount of time the session has been on this AP AAA-VLAN is from Radius or the local database Show sessions network session-id Output DOT1X See Also clear sessions network on Session Management Commands NN47250-100 Version Clear security acl Security ACL CommandsSyntax clear security acl acl-name all editbuffer-index Clears all security ACLs Set security acl ip acl133 hits #1 WSS# show security acl info allSet security acl ip acl134 hits #3 Set security acl ip acl135 hits #2 Out Clear security acl mapWSS# clear security acl map acljoe port 4 WSS# clear security acl map all Commit security aclSyntax commit security acl acl-nameall Type Class Mapping Rollback security acl Hit-sample-rateSee Also show security acl on Syntax rollback security acl acl-nameall Set security acl By UDP packets Any Routine precedence Minimum delayPriority precedence Immediate precedence WSS# commit security acl all WSS# set security acl ip acl123 deny 192.168.2.11 WSS set security acl map acl133 port 4 Set security acl mapWSS port or ports Tag tag-list Set security acl hit-sample-rate Configuration fileSyntax set security acl hit-sample-rate seconds Set security acl ip acl153 hits #3 Show security acl dscp Show security aclWSS# show security acl hits Index Counter ACL-name Show security acl hits Show security acl editbufferSyntax show security acl info all editbuffer WSS# show security acl editbuffer Syntax show security acl hits Show security acl infoSyntax show security acl info acl-nameall editbuffer WSS# show security acl info Show security acl map Show security acl resource-usage Show security acl resource-usage Output False-No default action type is defined True-A default action types is definedTrue-Security ACLs are mapped False-No security ACLs are mapped False-No security ACLs are mapped to incoming True-Security ACLs are mapped to incoming traffic Cryptography Commands Eap Crypto ca-certificatePEM-formatted Certificate See Also show crypto ca-certificate on WSS# crypto certificate adminCrypto certificate Crypto generate request on Crypto generate self-signed on Crypto generate keyDomain Ssh Syntax crypto generate request admin eap web WSS# crypto generate key adminCrypto generate request See Also show crypto key ssh on Email Address admin@example.com WSS# crypto generate request adminWebaaa option renamed to web Maximum string length for State Name increased Crypto certificate on Crypto generate key on Syntax crypto generate self-signed admin eap webCrypto generate self-signed Crypto otp WSS# crypto generate self-signed adminSyntax crypto otp admin eap web one-time-password Crypto pkcs12 Syntax crypto pkcs12 admin eap web file-location-urlSee Also crypto pkcs12 on WSS# crypto generate otp eap hap9iN#ss WSS# copy tftp//192.168.253.1/2048full.p12 2048full.p12 See Also crypto otp onWSS# crypto otp eap hap9iN#ss WSS# crypto pkcs12 eap 2048full.p12 Show crypto ca-certificate Syntax show crypto ca-certificate admin eap webShow crypto ca-certificate Output WSS# show crypto ca-certificate Show crypto certificate Syntax show crypto certificate admin eap webCrypto certificate Output WSS# show crypto certificate eap See Also crypto generate key on Show crypto key domainShow crypto key ssh Cryptography Commands NN47250-100 Version Syntax clear radius deadtime key retransmit timeout Radius and Server Groups CommandsClear radius Clear server group on Clear radius client system-ip Clear radius proxy port Clear radius proxy clientSee Also set radius proxy client on See Also set radius proxy port on Clear server group Clear radius server See Also set server group on Set radius Set radius client system-ip Set radius proxy port Set radius proxy clientSyntax set radius proxy client address ip-address WSS# set radius proxy client address 10.20.20.9 key radkey1 Ssid ssid-name Ssid supported by the third-party AP Set radius serverWSS# set radius proxy port 3-4 tag 104 ssid mycorp Encrypted-key-No key Author-password-nortel Members server Set server group 23x0# set server group shorebirds load-balance disable 23x0# set server group shorebirds load-balance enableSet server group load-balance Group-name Server group name of up to 32 characters Radius and Server Groups Commands NN47250-100 Version 802.1X Management Commands Clear dot1x max-req Clear dot1x bonded-periodSyntax clear dot1x max-req WSS# clear dot1x bonded-period Clear dot1x reauth-max Clear dot1x port-controlClear dot1x quiet-period Clear dot1x reauth-period Clear dot1x timeout auth-server Clear dot1x tx-period Clear dot1x timeout supplicant WSS# set dot1x authcontrol enable Syntax set dot1x authcontrol enable disableSet dot1x authcontrol Set dot1x bonded-period See Also show dot1x on Set dot1x key-txSet dot1x max-req WSS# set dot1x port-control forceauth Set dot1x port-controlWSS# set dot1x max-req Set dot1x reauth Set dot1x quiet-period Set dot1x reauth-period Set dot1x reauth-max Set dot1x timeout supplicant Set dot1x timeout auth-server Set dot1x tx-period Syntax set dot1X wep-rekey enable disableSet dot1x wep-rekey Syntax set dot1x tx-period seconds Show dot1x Set dot1x wep-rekey-period WSS# show dot1x clients WSS# show dot1x config WSS # show dot1x stats Show dot1x stats Output 520 802.1X Management Commands Rogue Information Show rfdetect clients on RF Detection CommandsShow rfdetect data on Show rfdetect visible on Clear rfdetect black-list Clear rfdetect attack-listSyntax clear rfdetect attack-list mac-addr Syntax clear rfdetect black-list mac-addr Clear rfdetect ssid-list Clear rfdetect ignore Set rfdetect attack-list Clear rfdetect vendor-listSyntax clear rfdetect vendor-list client ap mac-addrall WSS# clear rfdetect vendor-list client aabbcc000000 Set rfdetect ignore Set rfdetect black-list 23x0# set rfdetect log enable Syntax set rfdetect log enable disableSet rfdetect log 23x0# set rfdetect ignore aabbcc112233 See Also show log buffer on Set rfdetect signatureSet rfdetect ssid-list WSS# set rfdetect ssid-list mycorp Set rfdetect vendor-listSyntax set rfdetect vendor-list client ap mac-addr WSS# set rfdetect vendor-list client aabbcc000000 Show rfdetect black-list Show rfdetect attack-list Show rfdetect clients Output Show rfdetect clientsSyntax show rfdetect clients mac mac-addr WSS# show rfdetect clients mac 000c4163fd6d Show rfdetect clients mac Output WSS# show rfdetect countermeasures Show rfdetect countermeasuresSyntax show rfdetect countermeasures Show rfdetect countermeasures Output Show rfdetect countersSee Also set radio-profile countermeasures on Syntax show rfdetect counters Syntax show rfdetect data Show rfdetect data Show rfdetect data Output Show rfdetect mobility-domain Show rfdetect ignoreSyntax show rfdetect ignore WSS# show rfdetect ignore Total number of entries Vendor, Type, and Flags fields added Bssid and ssid options addedWSS# show rfdetect mobility-domain WSS# show rfdetect mobility-domain ssid nrtl-webaaa Show rfdetect mobility-domain Output Show rfdetect mobility-domain ssid or bssid Output Show rfdetect ssid-list Show rfdetect visible Show rfdetect vendor-listSyntax show rfdetect vendor-list WSS# show rfdetect vendor-list Mac-addr Base MAC address of the Nortel radio Show ap status commandShows neighbor information for radio Version Vendor, Type, and Flags fields added Show rfdetect visible Output RfpingSyntax rfping mac mac-addrsession-id session-id Show rfdetect data on Show rfdetect mobility-domain on WSS# rfping mac 000e9bbfad13 Rfping Output Backup File Management Commands WSS# backup system tftp/10.10.20.9/sysabak critical Syntax backup system tftp/ip-addr/filenameall criticalDir on Restore on Tftp/ip-addr / filename Copy Clear boot backup-configurationClear boot config Source-url Syntax copy source-url destination-urlDestination-url Be one of the following Delete WSS# copy tftp//10.1.1.107/WSS020101.020 boot1WSS020101.020WSS# copy floorwss tftp//10.1.1.1/floorwss WSS# copy tftp//10.1.1.1/closetwss closetwss WSS# delete testconfig WSS# copy testconfig tftp//10.1.1.1/testconfigSyntax dir subdirname file core boot0 boot1 Dir WSS# dir file WSS# dirWSS# dir old WSS# dir boot0 Install soda agentOutput for dir WSS# dir core WSS# install soda agent soda.ZIP agent-directory sp1 Load configSyntax load config url Uninstall soda agent on Set service-profile soda mode on WSS# load config testconfig1 WSS# load configSyntax md5 boot0 boot1filename Save config on Show boot on Show config on Mkdir Pubs# md5 boot0WSS040003.020Syntax mkdir subdirname WSS# mkdir corp2 WSS# reset system Reset systemSyntax reset system force Restore Rmdir Save configSee Also backup on Syntax save config filename Set boot backup-configurationWSS# save config testconfig1 Syntax set boot backup-configuration filename Set boot partition Set boot configuration-file Boot configuration, added Show bootNew fields, Configured boot version and Backup Output for show boot Syntax show config area area all Show configConfiguration area. You can specify one of the following Area area Rfdevice changed to rfdetect Show versionNew options added for remote traffic monitoring snoop WSS# show version details See Also show boot on Uninstall soda agentSyntax uninstall soda agent agent-directory directory WSS# uninstall soda agent agent-directory sp1 Install soda agent on Set service-profile soda mode on File Management Commands NN47250-100 Version Clear log trace Trace CommandsSyntax clear log trace WSS# clear log trace Save trace Clear trace Set trace authorization Set trace authenticationWSS# set trace authentication user jose WSS# save trace traces/trace1 User-readable information. If you do not specify a level Level 5 is the defaultSet trace dot1x WSS# set trace sm mac-addr Set trace sm WSS# show trace Show traceSyntax show trace all Clear snoop Snoop CommandsSyntax clear snoop filter-name WSS# clear snoop snoop1 WSS# clear snoop map snoop2 ap 3 radio Clear snoop mapWSS# clear snoop map all Examples clear snoop map filter-nameap ap-numradio 1 Set snoop Examples set snoop map filter-nameap ap-numradio 1 Set snoop mapWSS# set snoop snoop1 observer 10.10.30.2 snap-length Enable Stop-after num-pkts Set snoop modeWSS# set snoop map snoop1 ap 3 radio Filter. See show snoop stats on Show snoop WSS# set snoop snoop1 mode enable stop-afterSyntax show snoop WSS# show snoop Show snoop map Show snoop info Examples show snoop stats filter-nameap-numradio 1 Show snoop statsClear snoop map on Set snoop map on Show snoop on Show snoop stats Output Snoop Commands NN47250-100 Version Clear log System Log CommandsSyntax clear log buffer server ip-addr WSS# clear log server Severity Logging state enabled or disabledSet log Defaults Set log mark Show log buffer See Also show log config onSet log trace mbytes Error-The WSS is missing data or is unable to Reboot or shut downProblems have occurred. These are logged for Diagnostic purposes. No action is required Syntax show log config Show log configWSS# show log config Show log trace Error-The WSS is missing data or is unable to form Conditions are not resolved, the WSS can rebootPositive number for example, +100, displays that Number of log entries starting from the oldest WSS# show log trace +5 facility Rogue WSS# show log trace facility ? System Log Commands NN47250-100 Version Boot Prompt Commands See Also boot on AutobootSyntax autoboot on on OFF off Boot autoboot Boot Change on Show on Boot boot FN=WSS010101.020 DEV=boot1Change Boot on Create on Delete on Dhcp on Next on Show on Boot change Change on Delete on Next on Show on Boot createCreate Boot dhcp Boot deleteDhcp Syntax dhcp on on OFF off Boot dir Syntax dir c d e f boot0 boot1Diag Fver on Version on Boot fver boot1 Syntax fver c d e f boot0 boot1 filenameSyntax help command-name Fver See Also ls on Boot help fver Boot next ResetNext See Also help on Show Boot reset Boot show Compact flash. Boots using nonvolatileOutput for show Storage or a flash card Partition Nonvolatile storage area containing bootPrimary partition of the flash card in the flash Secondary partition of the flash card Enables the poweron test flag Boot versionTest Version Dir on Fver on Numerics Command Index NN47250-100 320658-G Version Delete 539 Command Index 282 340 Command Index Command Index MAC addresses 12 in user globs Vlan globs Command Index NN47250-100 320658-G Version Page Nortel WLAN-Security Switch 2300 Series Release

IP Services Commands 161

Table 6: Output for show ip alias

Field

See Also