Nortel Networks 2300 Series manual Show radio-profile, Output for show load-balancing group

386AP Commands

Examples The following command displays information about the AP radios that are in the same group as radio 1 on AP 3:

WSS# show load-balancing group ap 3 radio 1 Radios in the same load-balancing group as: ap3/radio1

--------------------------------------------------

IP address	AP	Radio Overlap
------------------	----	-----	-------
10.2.28.200	3	1	100/100

The following command displays information about RF load balancing group blue:

WSS# show load-balancing group blue

Load-balancing group: blue
IP address	AP	Radio	Clients
------------------	----	----- -------
10.2.28.200	3	1	0

Table 55 describes the fields in displayed by the show load-balancing group command.

	Table 22: Output for show load-balancing group
Field	Description
IP address	The IP address of the AP in the load-balancing group.
AP	AP number
Radio	Radio number
Overlap	The amount of overlapping coverage area the specified AP radio
	has with the AP radio in the list. An overlap of 100/100 indicates
	that the AP radios have exactly the same coverage area.
Clients	The current client load on the AP radio.

See Also

•set load-balancing strictness on page 277

•set ap radio load-balancing on page 268

•set ap local-switching mode on page 260

show radio-profile

Displays radio profile information.

Syntax show radio-profile {name ?}

name	Displays information about the named radio profile.
?	Displays a list of radio profiles.

NN47250-100 (Version 02.51)