Nortel Networks 2300 Series manual Show dot1x stats Output, WSS # show dot1x stats

802.1X Management Commands 519

port 10, authcontrol: auto, max-sessions: 1

port 11, authcontrol: auto, max-sessions: 1

port 12, authcontrol: auto, max-sessions: 1

port 13, authcontrol: auto, max-sessions: 1

port 14, authcontrol: auto, max-sessions: 1

port 15, authcontrol: auto, max-sessions: 1

port 16, authcontrol: auto, max-sessions: 1

port 22, authcontrol: auto, max-sessions: 16

Type the following command to display 802.1X statistics:

WSS# show dot1x stats
802.1X statistic	value
----------------	-----
Enters Connecting:		709
Logoffs While Connecting:		112
Enters Authenticating:		467
Success While Authenticating:		0
Timeouts While Authenticating:		52
Failures While Authenticating:		0
Reauths While Authenticating:		0
Starts While Authenticating:		31
Logoffs While Authenticating:		0
Starts While Authenticated:		85
Logoffs While Authenticated:		1
Bad Packets Received:		0

Table 76 explains the counters in the show dot1x stats output.

Table 1: show dot1x stats Output

Field	Description
Enters Connecting	Number of times that the WSS state transitions to the
	CONNECTING state from any other state.
Logoffs While Connecting	Number of times that the WSS state transitions from
	CONNECTING to DISCONNECTED as a result of receiving an
	EAPoL-Logoff message.
Enters Authenticating	Number of times that the state wildcard transitions.
Success While Authenticating	Number of times the WSS state transitions from
	AUTHENTICATING from AUTHENTICATED, as a result of an
	EAP-Response/Identity message being received from the
	supplicant (client).
Timeouts While Authenticating	Number of times that the WSS state wildcard transitions from
	AUTHENTICATING to ABORTING.
Failures While Authenticating	Number of times that the WSS state wildcard transitions from
	AUTHENTICATION to HELD.

Nortel WLAN—Security Switch 2300 Series Command Line Reference