456Session Management Commands

Table 5: show sessions network session-id Output (continued)

Field

Description

 

 

Tag

System-wide supported VLAN tag type.

 

 

Session Start

Indicates when the session started.

 

 

Last Auth Time

Indicates when the most recent authentication of the session occurred.

 

 

Last Activity

Indicates when the last activity (transmission) occurred on the session.

 

 

Session Timeout

Assigned session timeout in seconds.

 

 

Idle Time-To-Live

Number of seconds the session can remain idle before WSS Software changes the

 

session state to Disassociated.

 

 

Login Type

Authentication type used to log onto the network:

 

DOT1X

 

MAC

 

LAST-RESORT

 

WEB-PORTAL

 

 

EAP Method

Extensible Authentication Protocol (EAP) type used to authenticate the session

 

user, and the IP address of the authentication server.

 

 

Session statistics as

Time the session statistics were last updated from the AP, in seconds since a fixed

updated from AP

standard date and time.

 

 

Unicast packets in

Total number of unicast packets received from the user by the WSS (64-bit

 

counter).

 

 

Unicast bytes in

Total number of unicast bytes received from the user by the WSS (64-bit counter).

 

 

Unicast packets out

Total number of unicast packets sent by the WSS to the user (64-bit counter).

 

 

Unicast bytes out

Total number of unicast bytes sent by the WSS to the user (64-bit counter).

 

 

Multicast packets in

Total number of multicast packets received from the user by the WSS (64-bit

 

counter).

 

 

Multicast bytes in

Total number of multicast bytes received from the user by the WSS (64-bit

 

counter).

 

 

Number of packets with

Total number of decryption failures.

encryption errors

 

 

 

 

Number of bytes with

Total number of bytes with decryption errors.

encryption errors

 

 

 

 

Last packet data rate

Data transmit rate, in megabits per second (Mbps), of the last packet received by

 

the AP.

 

 

Last packet signal strength

Signal strength, in decibels referred to 1 milliwatt (dBm), of the last packet

 

received by the AP.

 

 

Last packet data S/N ratio

Signal-to-noise ratio of the last packet received by the AP.

 

 

Protocol

Wireless protocol used.

 

 

Session CAC

State of session-based Call Admission Control (CAC) on the SSID’s service

 

profile.

 

 

 

NN47250-100 (Version 02.51)

Page 456
Image 456
Nortel Networks 2300 Series manual DOT1X