Nortel Networks 2300 Series manual Clear ip dns server, Clear ip route, WSS# clear ip dns server

IP Services Commands 111

clear ip dns server

Removes a DNS server from a WSS configuration.

Syntax clear ip dns server ip-addr

ip-addr IP address of a DNS server.

Defaults None.

Access Enabled.

Examples The following command removes DNS server 10.10.10.69 from a WSS’s configuration:

WSS# clear ip dns server 10.10.10.69

success: change accepted.

See Also

•clear ip dns domain on page 100

•set ip dns on page 113

•set ip dns domain on page 114

•set ip dns server on page 115

•show ip dns on page 151

clear ip route

Removes a route from the IP route table.

Syntax clear ip route {default ip-addr mask ip-addr/mask-length}default-router

default		Default route.
		Note: default is an alias for IP address 0.0.0.0/0.
ip-addr mask		IP address and subnet mask for the route destination, in dotted
		decimal notation (for example, 10.10.10.10 255.255.255.0).
ip-addr/mask-length		IP address and subnet mask length in CIDR format (for example,
		10.10.10.10/24).
default-router		IP address, DNS hostname, or alias of the next-hop router.
Defaults	None.
Access	Enabled.

Examples The following command removes the route to destination 10.10.10.68/24 through router 10.10.10.1:

WSS# clear ip route 10.10.10.68/24 10.10.10.1

success: change accepted.

Nortel WLAN—Security Switch 2300 Series Command Line Reference