Nortel Networks 2300 Series manual Output for show ap vlan, Syntax show ap vlan ap-number

376AP Commands

Syntax show ap vlan ap-number

ap-numberIndex value that identifies the AP on the WSS switch.

Defaults None.

Access All.

History Introduced in WSS Version 6.0.

Examples The following command displays information about the VLANs switched by AP 7:

WSS# show ap vlan 7
AP 7:
VLAN Name	Mode	Port	Tag
------------ ------------ ----		-------------
1 default	local	1	none
2 red	local	1	2
	radio_1		20
	radio_1		21
	radio_2		22
4 green	local	1	4
	radio_1		23
5 yellow	tunnel	WSS_tun	5
	radio_1		24

Table 42 describes the fields in the show ap vlan output.

	Table 15: Output for show ap vlan
Field	Description
VLAN	VLAN number.
Name	VLAN name
Mode	Whether packets for the VLAN are locally switched by the AP,
	or are tunneled to an WSS switch, which places them on the
	VLAN.
Port	The port(s) through which traffic for the VLAN is sent.
TAG	VLAN tag value. If the interface is untagged, none is displayed
	in the TAG field.

•set vlan-profile

•set ap local-switching mode on page 260

NN47250-100 (Version 02.51)