Nortel Networks 2300 Series manual Mobility Domain Commands, Clear domain security

227

Mobility Domain Commands

Use Mobility Domain commands to configure and manage Mobility Domain groups.

A Mobility Domain is a system of WSSs and APs working together to support a roaming user (client). One WSS acts as a seed switch, which maintains and distributes a list of IP addresses of the domain members.

Note. Nortel recommends that you run the same WSS Software version on all the WSSs in a Mobility Domain.

This chapter presents Mobility Domain commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Mobility Domain	set mobility-domain mode secondary-seeddomain-nameseed-ip on
	page 222
	set domain security on page 218
	set mobility-domain member on page 219
	set mobility-domain mode member seed-ip on page 220
	set mobility-domain mode member secondary-seed-ip on page 220
	show mobility-domain on page 222
	show mobility-domain config on page 222
	clear mobility-domain member on page 218
	clear domain security on page 217
	clear mobility-domain on page 218

clear domain security

Disables WSS-WSSsecurity.

Syntax clear domain security

Defaults None.

Access Enabled.

History Introduced in WSS Software 5.0.

Usage This command is equivalent to the set domain security none command.

Examples The following command disables WSS-WSS security on a WSS:

23x0# clear domain security

success: change accepted.

Nortel WLAN—Security Switch 2300 Series Command Line Reference